Post your pics/vids of what you take down the track
Like the title says, lets see what everyone rides! If you ride more than 1 bike, put pics of the other ones too. I have a few, gotta get the pics together and I'll post mine.
Re: Post your pics/vids of what you take down the track
What I started with, had an Akrapovic, BMC filters, PC3, slammed, strapped, and vortex rearsets. I started realizing as I got older I needed somewhere to play legally to keep my insurance cheap so I dropped this and started drag racing it.
And now, slammed, strapped, Ti Force slipon, PC3, MPS auto shifter, Thompson arm, brocks springs, and a Cycle Concepts drag pack.
On the way, mirror deletes, new windscreen, and then probably a Brocks exhaust and tune. Then I will either spray it or do a small street friendly turbo setup because I ride it all the time on the street as well.
One of these days, I will get some video/action shots at the track but as of yet I haven't been with anyone with a cam.
__________________
K5 GSXR 1000. Underpowered, slow, unreliable, and the frame will probably crack any minute.
Re: Post your pics/vids of what you take down the track
-1+2, bmc, pcIII, conti tire . and thats about it.
1.79 60's
7.3 in the 1/8
11.79 in the 1/4 (only done 1/4 twice, messed up the shifts both times, hopefully can lower it next year)
Re: Post your pics/vids of what you take down the track
My Bike. Stock motor, 64" WB, drag pack, brocks springs, Brocks street meg, pc3, mr11, -2+1, shifter.
1.41 5.59@128 8.71@154 http://www.vimeo.com/2518727
Buddies 06 1k. stock motor, 63" WB, drag pack, brocks springs, brocks street meg, pc3, mr11, -1+3.
1.46 5.60@130 8.68@153(2nd pass on bike) http://www.vimeo.com/2524067
another 06 1k. stock motor, 61" WB, drag pack, springs, street meg, pc3, 87 pump gas, -2+2
1.48 5.71@127 8.87@149 http://www.vimeo.com/2528867
__________________
2006 GSXR 1000, Stock Motor, Brocks Street Meg, PCIII USB Power Commander, RC Wheels, Mcintosh Alumipro Arm, 63" WB, Cycle Concepts Drag Pack, Brocks Springs, CO2 Shifter, -2 Front +1 Rear Gearing.
Best 60'-1.39
Best 1/8-5.59@128.35
Best 1/4-8.71@ 154.85
On Motor. For Now
Re: Post your pics/vids of what you take down the track
Lookin good smitty, get ready to have to bend that plate up though, as soon as you launch the shit out of it and it squats hard, it's going to hit the tire and fold it FWD, I have wrecked a couple of plates like that . You should see my inspection sticker, looks like someone did a burnout on it........
Re: Post your pics/vids of what you take down the track
Quote:
Originally Posted by slodsm
Lookin good smitty, get ready to have to bend that plate up though, as soon as you launch the shit out of it and it squats hard, it's going to hit the tire and fold it FWD, I have wrecked a couple of plates like that . You should see my inspection sticker, looks like someone did a burnout on it........
Well, I guess in a way I did
Thanks , yeah Iam gonna bend it tonight also gonna try to get this thing to start tonight the pwr wire to the starter could be loose I will keep you posted though
Re: Post your pics/vids of what you take down the track
I like everyones version of what a stock motor is:_lol: 8.70-8.80 on a stock motor....maybe with spray. Not dissing anyones riding abilities, but It aint a stock motor imo. If you are that good of a rider on what you say the bike is, pm me and you can fly down to make some passes on my bike with the same setup. If you make it go 8.70-8.80, I will pay for your airfair, hotel, and give you $$$$! We have one of the fastest tracks in the country down here and its at sea level.
Linear Mode
