Motorcycle: 09 GSXR 750 Black/Blue, cat delete, set valve and pair valve delete, moto gp shift, flashed ECU, R6 throttle tube, K&N, Underbike Yoshi r77, 520 conversion -2in front, HID, Billet levers, braided lines.
Posts: 339
Re: How to install pazzo levers
Take your time taking the old one apart, make sure you run the clutch adjuster in to make it easier, then readjust the clutch freeplay. You want enough free play to fit a quarter in between the clutch lever and lever mount without working the clutch. make sure that you get the plunger lined up and remember don't overtighten the bolt will make the lever bind the nut locks it down so it cant back off. And some levers will reuse the bushing from the factory levers so don't lose it.
lol
Linear Mode
