So I installed the grips today and the woodcraft sliders. The grips were a piece of cake after spraying some hairspray. I also used water sealant to help avoid future corrosion.
The sliders were a little tricky. There's a long and short one. I think I put them on backwards because the brake side is sticking out a lot and the clutch side seems very short. However, I couldn't switch them without trimming the fairing part were it bolts into the frame. Will it make a difference if I leave them as they are?
Here's some crappy pictures to see if it helps
ImageUploadedByMO Free1355201118.621166.jpg
ImageUploadedByMO Free1355201130.018545.jpg
ImageUploadedByMO Free1355201146.135127.jpg
ImageUploadedByMO Free1355201158.035558.jpg
The fairing was cracked when I bought it.
Sent from my iPhone using Motorcycle.com Free App
Linear Mode
