K6 with m4 exhaust

[iam]

Hi guys!
I tried to post this on an m4 exhaust tread with no luck, so I hope i get lucky with this thread

I have a k6 600 with the m4 gp slip-on like the one on the picture. The "cat/midpipe" has been pressed in a bit, like half off an inch on the bottom. Do I have to replace that or is that just some shallow damage? Whats inside that thing actually? The original cat has been removed.

[MotoMummy]

It's another muffler to help quiet it or else it would be stupid loud. It's just a straight pipe in there with packing around it. A dent won't affect it one bit. I doubt the core tube in it was even touched. You wouldh ave to end it and go half way through it to hit the core tube. If it's even an inch deep you should be fine. Look down it with a flashlight and see if the core tube is still round inside it. You would have to take it off of course to do that.

[Tater Tot Wee Woo]

Originally Posted by MotoMummy

It's another muffler to help quiet it or else it would be stupid loud. It's just a straight pipe in there with packing around it. A dent won't affect it one bit. I doubt the core tube in it was even touched. You wouldh ave to end it and go half way through it to hit the core tube. If it's even an inch deep you should be fine. Look down it with a flashlight and see if the core tube is still round inside it. You would have to take it off of course to do that.

I've heard some with that part taken off. Obnoxiously loud!!!!

[TheCunningMan]

The original model was titanium and did not have the underbelly muffler. Yes, it and the EKG were stupid loud. I remember hearing them at Daytona 2006 on the AMA bikes before they were available. You could hear them outside the speedway over all the rest. I ordered one immediately lol.

[1/4milecrazy]

Originally Posted by PeeWee Woo Who

I've heard some with that part taken off. Obnoxiously loud!!!!

My M4 full system doesnt have that part, it is kind of loud.

[iam]

Originally Posted by MotoMummy

It's another muffler to help quiet it or else it would be stupid loud. It's just a straight pipe in there with packing around it. A dent won't affect it one bit. I doubt the core tube in it was even touched. You wouldh ave to end it and go half way through it to hit the core tube. If it's even an inch deep you should be fine. Look down it with a flashlight and see if the core tube is still round inside it. You would have to take it off of course to do that.

It wont affect anything? That's good! Haven't started the bike after the accident, the bike is now in my livingroom for the winter! Happened while moving the bike indoor :P.

Yeah the muffler is hella loud! Have tried to find a dbkiller for it, but no luck. If I'm correct, this is the old version and doesn't have something to fasten the dbkiller on it. I like the sound tho, but don't thing my neighbors do :P

[MotoMummy]

Originally Posted by TheCunningMan

I ordered one immediately lol.

lol