Motorcycle: 96 GSXR750, 07 CBR1KRR, ZX7/9RR F-USA AMA
Re: GSXR 98 Srad fuel and vaccum pipe instalation
Listen to to me...... My answers are the truth.
Picture 1: that plastic barb doesn't belong there, that line should go straight to petcock and supply vacuum to open it when motor is running. It is why I didn't answer your original post, when dj said it was part of the solenoids..... It doesn't belong on your bike. (he has been doing a great job helping yo)
Picture 2: yes he wants you to put a filter there, I disagree, as I think that people should pull the fuel pump, clean the stock filter, maintain the tank, rather than put a band-aid on it, but that's ok.
Picture 3:yes,connects to the rh rear of the airbox, and supplies air to the solenoids.
[QUOTE=senator8]Haha! You're more than 1%. My bike ran perfectly all year. All I did was oil changes and thumbed the starter. While my competitors had bikes and carbs in pieces at the track I was enjoying a coffee and saying "thanks Chris"
if i remove the tee piece the line will be to short so remove the tee piece and buy a straight line going from the crank case into the petcock correct? and il get that filter later asweel thanks for helping
ok just saw your response ccm thanks for the input both of you guys il get those jobs done then so when the rpevious owner had this runner my solenoids have been having no air drawn to them it seems could that cause any additional problems? and the tee piece in the vac line looks it was some kind of extention for the line maybe 1more question could any of this bad hosing cause a possible bogging issue i have had it happens at around 5k+ and the bike really struggles to keep going