Interchangeable parts - Page 9 : Suzuki GSX-R Motorcycle Forums: Gixxer.com

**ozysrad7** · 11-28-2012, 06:52 AM

i just took a gamble on ebay and bought a pair of yoshi rs3 titanium bolt on cans from a 05-07 sv 1000 for $160 based on what i could tell from the photos, as it turns out the right hand can is a perfect fit on my k1 750. if i drill out the rivets from the end cap of the left one it could be fliped over to suit the gsxr aswell you would just have to flip the badge over too.

**boostless750** · 11-28-2012, 10:03 AM

As anyboby used the front and rear rims from 08-09 hayabusa on 2000gsxr

**2/2warlords** · 03-01-2013, 04:39 PM

ok i know this Thread is old but i want to know can i use the fairings and air tubes of a 2001 gsxr 1000 on my 03 gsxr 600?

**Bdub28** · 03-17-2013, 08:25 PM

Does anybody know if a yoshimura r-77 slip on off a 08 600 would fit on a 2001 gsxr 600/750?

Sent from Motorcycle.com Free App

**600k2** · 03-17-2013, 10:04 PM

no.

**Flogsxr** · 03-23-2013, 09:24 AM

Hello,

Sorry for my English...

Fork gsxr1000 k3-k4 is Plug and play for gsxr 750 K2 ???

Thanks for reponse

**Chugs** · 03-23-2013, 03:09 PM

Forks will but calipers and rotors will be needed as well, use the search for additional info.

**Flogsxr** · 03-24-2013, 01:16 PM

Thanks Chugs !!!

**01g1xxer600** · 04-14-2013, 04:00 PM

Quick question im looking to put an 03 gixxer 1000 head on an 01 gixxer 1000 block is there anything i should know anything i need to change or does it just bolt right up and everything besides the wiring harness the same?

**Chugs** · 04-14-2013, 04:14 PM

Compare specs in service manual below.

**01g1xxer600** · 04-14-2013, 04:37 PM

thanks man thats something i had not thought bout but it sure did the job..

**theducman** · 04-24-2013, 09:00 PM

Are 04/05 600/750 full exhausts the same?

**FlaGatorL** · 04-24-2013, 09:17 PM

Quote:

Originally Posted by theducman

Are 04/05 600/750 full exhausts the same?

Yes

Sent from Motorcycle.com App

**915cycle** · 05-18-2013, 09:14 PM

i have an opportunity to buy 06-07 600 forks, brakes and triple tree clamps, i want to swap that to my 2003 600 but im wondering if it will bolt up fine. or will i need the 06-07 rim and rotor to swap it with no issues? and is that all or am i missing other parts?

**Vinch1991** · 06-08-2013, 11:45 AM

Does anyone have any more info on the 750 electrical change as I have a 750y set up with a k1 engine and it won't run properly

**Skwirl865** · 06-11-2013, 09:29 AM

Anybody know if k6 1000 driver seat will fit k6 750?