I put the motion pro revolver throttle on my bike k7 600 and it made turning the throttle really hard. I could get it so it was easy to turn like stock but then it wouldn't return when forks were turned in different directions. I just got used to it. I'll probably take it off and sell it this winter.
I put the motion pro revolver throttle on my bike k7 600 and it made turning the throttle really hard. I could get it so it was easy to turn like stock but then it wouldn't return when forks were turned in different directions. I just got used to it. I'll probably take it off and sell it this winter.
Yana Shiki ram air ducts on my k4 they were seriously 1/2 inch too short on both sides and made of the most brittle plastic known to man. No mounting holes lined up. The finish on the plastic also was sub par. Garbage. Absolute garbage. I should have bought used oem ones from eBay. Live and learn I guess.
I also put it on my r6 track bike. Followed all the instructions, routed everything the same way. It still has the same outcome as the one I put on my gsxr. I'm not retarded with working on stuff either so it's either something small that im not seeing that I did twice or it's just the fact that the throttle is harder to turn with the revolver throttle kit.
Yana Shiki ram air ducts on my k4 they were seriously 1/2 inch too short on both sides and made of the most brittle plastic known to man. No mounting holes lined up. The finish on the plastic also was sub par. Garbage. Absolute garbage. I should have bought used oem ones from eBay. Live and learn I guess.
Linear Mode
