Re: PAIR Valve mod/remove
I don't care much about the popping. I don't get much of it, with the m4 gp slip on and they are not too loud. But I am just curious if by capping off the "PAIR" on the engine and air box does it help in reducing the engine vibrations as well? I have a thread about my K8 600 having high freq vibrations at the clip ons and mirrors, that numbs my hands.
I have masked it by adding heavier bar end weights and I think reduced it to a minimum from 7K with the fuel mapping on the Bazzaz Zfi. Perhaps after disabling the SET valve also helped a little..(?)
Now, I primarily get the vibrations on the mirror at about 5,5K rpm which is acceptable for me, other than I couldn't differentiate if it is a cop or a taxi I see on my mirrors. The other vibration which is on my clip ons is at around 6,8K rpm. This seems to be my bike's "flat spot."
Anyway, I just wanted to give a little history of the why I am curious if this mod would reduce or eliminate the vibrations. Thanks appreciate your help.
Last edited by bandit400; 09-23-2014 at 02:55 AM.