Gsxr k6 cams

[mad k9]

Hi all,after some advice! Just gone from yam to Suzuki engine for my race outfit,what would the best cam combo I could try for low to mid range torque,I don't expect any trade secrets on timing,just the cams ie intake cam on exhaust side or gsxr 750 cams,thanks for your time.

[mpp12]

What bike do you have?

[mad k9]

Hi it will be fitted into a custom grasstrack sidecar frame,the same as the Australian 1000cc sidecar except with rear suspension,so want to use the k6 torque for grass rather than all out bhp.

[mpp12]

use then K3-4 cams, you will have the low end mid range you need

[JP1143]

Originally Posted by mpp12

use then K3-4 cams, you will have the low end mid range you need

I concur.

[mad k9]

Hi thanks very much for your reply,much appreciated,will try and post some pics up of the outfit when finished,my gixxer 600 is only standard so won't show her off yet

[mad k9]

Ahhh damm forgot to ask,wil the k3 k4 cams work ok with standard cam sprockets or will they need to be timed in using adjustable ones,thanks again for your time.James.