Suzuki GSX-R Motorcycle Forums Gixxer.com banner

Interchangeable parts

435K views 377 replies 208 participants last post by  ted_lim_76 
#1 · (Edited by Moderator)
I've been searching for some replacement parts for my bike, and to find info on some of my upgrades. Thought I'd compile a list of some of the things I have found out, to help others search. Please correct anything wrong in my list or add other things. Maybe we could make a sticky?

In general:
00-03 750 is all the same. (some electronics are different)
01-03 600
01-02 1000.

750 and 1000 clipons are compatable.

Windscreen / rear seat:
00-03 750s
01-03 600's
01-02 1000's are all interchangeable


Fairings:
all fairing stays are compatible from the same gen.

gsxr 600 and 750 are interchangeable from 2001-2003
gsxr 1000 from 2001-2002

PS: The side fairings from 1000 are not really interchangeable with other models.. everything else is.

Front fender:
01-03 600, 00-03 750, and 01-02 1000 are the same fender.
04-05 600/750, and 03-04 1000 are the same fender but won't fit the above models without modifying the rear fender mounts.
06-07 600/750, and 05-08 1000 are the same fender and will bolt straight up to the list directly above (the previous generation) and will need the modification as above to fit the first-gen K series.
[/LIST]


Wheels:
600 01-05 - 17x5.5
750 00-05 - 17x5.5 / 17x6.0

all interchange

Rear wheel:
1000 01-04 - 17x6.0 should also fit a 00-03 750
SRAD rear wheel - 17x5.5 (needs sprocket, sprocket carrier, and all the wheel spacers too.)

05 GSXR1000, 06 600/750, and onwards rims are lighter with thinner spokes.

Rear shock interchangeability:
600 2001-2003
750 2000-2003
1000 2001-2004 (a little bit higher?)
600/750 04/05 (7mm higher)

Exhaust:
Bolt-on:
2001-2003 600
2000-2003 750
2001-2004 1000
04-05 gsxr 600-750
Are all the exact same 4 bolt pattern?

Headers:
01-06 1000 headers will fit.
you have to buy the same year pipe as you do headers.
05-06 headers are the most popular bc of the m4 GP slip-on.

Rear rotors:
01-08 have the SAME REAR ROTORS

Engine:
In the 750 the 1000 motor will bolt right up with the exception of the top right front motor mount. They do sell brackets that allow you a Bolton or you can have a fab shop make some for you. You will need to buy a 1000 motor kit (harness, CDI, speedo, throttle body, radiator, oil cooler, etc)

Swingarm:
2000-03 750
2001-02 1000
2001-02 600
These are interchangeable, but som

96-99, 00-03, and 04-05 have the same in the front pivot section, but the length is different (but not much).

03 1000 on my 600 and it fits perfectly but need the rear caliper and mount...

Tail:
04-05 will fit with modifications.

Front forks:


00-03 750 forks and brakes. It's the cheapest, easiest, and the better setup.
04 +750/600 or 05 + 1000 Better, more expensive.
 
See less See more
1
#134 ·
I'm here to add a tidbit of info. Regarding the 00-03 750 and 01-03 600 headers. If you swap one for the other, i.e you have an 03 750 and grab a header from an 03 600, it will fit. One caveat, if you use a header off a 600 on 750, it will touch the oilpan and heat up the oil. Thats my bit I'll add to this thread. I have no idea about the reverse as I do not have a 600, but my guess is that it will be fine. I cannot say anything about the 00-02 1000 header.
 
#156 ·
Hey there guys,
When it comes to all the numbers and starring at diagrams and such I am hopeless...

What I am wanting to know is if my 01' 600 will be-able to bolt a 06' 600 front end complete with bearings, triples, forks, the whole 9 yards right into my empty neck on my bike..

My bike currently has nothing at all on the front, just the bare neck waiting for something to be put in..

Thanks in advance

a simple yes, or a no with an explanation would be super helpful!
 
#160 ·
Don't quite know what you're expecting here, you can see which parts are interchangeable and go off of that for your eBay or craigslist searches, or you can get your red R on here for $15 to use our classifieds.

Just for reference, your for sure fitting parts will be from an 01-03 600/750. Good luck on your searches.
 
#161 ·
i just took a gamble on ebay and bought a pair of yoshi rs3 titanium bolt on cans from a 05-07 sv 1000 for $160 based on what i could tell from the photos, as it turns out the right hand can is a perfect fit on my k1 750. if i drill out the rivets from the end cap of the left one it could be fliped over to suit the gsxr aswell you would just have to flip the badge over too.
 
Top