Not sure of the price. Wanted to see what the xro guys on here thought about them. Don't know much about them other than someone told me they were off an xro 4. Wanted to see if anyone could confirm or if its possible to even tell.
Sie has a set and they look the same. He will be loged on in a few hours and he will give you a straight answer. It's 5.41 am here.
If there the right price I would buy them, investment if ya hear me looking at ya.
yep they look like XR04,.. not for the srad ones ,but still factory parts very nice and good condition....and nice to see with the correct spindle,these look like a new unused set,so may be set up for the kayaba forks,if unstrapped xro4,id think they are the kit parts for the slingshot,but the magnesium does point to works item.
They are stamped xro 4 37. 37mm offset. So these aren't for a srad, too bad. Unless you get a bunch of additional parts? Can i make these work on a 97 srad? They do measure 50 on top and 54 bottom.
just the stem may needed to me worked on,as all the works bikes had one off frames,so may need work.
to get later xro5/6 or xro7/8/9 yokes is big money and can run in to many £1,000's if the set is complete with all the inserts and fork colliers.
these all came from henry he had the last 10sets as they were getting throwen out,they were for the Wn series off bikes also were made at yoshimura and then stamped with the model number.
Is that Mr Time waster!!! If it is make them aware of his antics. Not much point doing any deals with him or has the relationship improved since I was brought for a merry dance!!!
If you are looking to use these on an otherwise stock bike, I'd look for something else. If I recall correctly, they have a wider space between the fork tubes (20 or 25mm, I think) so you'd have to make a new axle, axle spacers, etc.
FWIW, they are magnesium with an aluminum stem (red, not pink). They are not coated or anodized, which is something else you'd need to do to run these in the real world.
William I've learned that most of the guys with quality parts are so far up there ass it becomes a ball ache trying to deal with them. The guy your referring to falls under that category, why Sie is even mentioning him baffles me???