I have a 2000 gsxr 600 with trashed front fairings. Im going to strip it down to a streetfighter look and make it into a kind of street/stunt bike. I am looking into building a crash cage and a 12 oclock bar. the crash cage is my main concern. I am a certified welder and I have a nearly unlimited supply of metals through my company, and I am designing a crash cage to fabricate. I am wondering about how the cage mounts onto the front motor mount, and what would be the best way to mount it to my frame around where the rear subframe mounts. Alterations to the frame would be an easy job too, I want the most strength possible. I plan on this bike hitting the ground multiple times. If anyone could enlighten me on how exactly the crash cages mount to the front motor mount and the best way to mount to my frame I would be greatly appreciative.
Ps, I am going with a basic 3 point cage, mounting to the front motor mount, to the frame near the rear subframe mounts, and mounting both sides together underneath the headers sort of like nerf bars on a quad. Thank you!
Ps, I am going with a basic 3 point cage, mounting to the front motor mount, to the frame near the rear subframe mounts, and mounting both sides together underneath the headers sort of like nerf bars on a quad. Thank you!