Guys how do I clear this error as I know my tps is set correctly when the bike starts and warms up the line is centerd. This just happened to me out of the blue while I was in Myrtle beach this weekend. Thanks.

C00 means no error.

I know it means no error is present, however it always is displayed and there is no jumper in between the red/white wire and white/black wire. It is really buggging me as it never shows the temp, thanks.

the wires are jumped someplace.. maybe not right at the connector but they have to be touching in order for that to be up. take a picture for us to look at of the connector.

Well this just sterted happening after I adjusted the idle since it was only idling at like 900 and I set it to 1150. Where may these wires be touching as I have double and triple checked the service connector. Thanks.

I work as an Electrical Tech on aircraft, i see this all the time. The wire are shorted out somewhere. Most likely it is inside the plug. you wont be able to see it from the out side, but inside the wire have it be crimped onto pins. well sometimes the wire is not crimped right which can cause 2 wire to become shorted out. Check the other side of wire they have to go somewhere. also the insulation on the wire may be chaffing on each other. keep looking or JUST GET A MULTIMETER.