|
02gixxer1g 05-27-2006, 06:02 PM Do they make drag racing seats for 1000's? I have seen them for busas but can't find shit for my k2. I tried cutting mine but I'm no seamstress and can't get the cover to look good the way I want it. Any help, suggestions or links appreciated BLACK051K 05-28-2006, 12:13 AM http://www.catalystracingcomposites.com/ 02gixxer1g 05-28-2006, 01:32 AM Sickest thing ever!!! Anyone know if you can put a cover on those so it isn't completely smooth? How would one go about adhereing a cover to that without staples?? I just ghettofied a cover on to my cut seat and it will get me around till I get a ledgit one. BLACK051K 05-28-2006, 12:45 PM Site also sells a foam padding you can cover/upholster and adhere/staple to seat pan. TRBLNKC 10-11-2007, 02:46 PM This is by far the best looking drag race seat on the market for the '05-06 1K. I hope they decide make it for the '07 1K too. www.gatlinracing.com http://www.gatlinracing.com/products/suzuki/gsxr1000/alumseat100.JPG http://www.gatlinracing.com/products/suzuki/gsxr1000/alumseat80.JPGhttp:// http://www.gatlinracing.com/products/suzuki/gsxr1000/alumseat90.JPG http://www.gatlinracing.com/products/suzuki/gsxr1000/alumseat70.JPG http://www.gatlinracing.com/products/suzuki/gsxr1000/alumseat60.JPG TRBLNKC 10-11-2007, 02:58 PM Would it be possible to have all of the K7 1K owners/racers here e-mail www.gatlinracing.com to inquire about making this seat available for the 2007 1K? As it stands now, the seat is only available for the '05-'06 and looks far better that the alternative, Catalyst racing seat pan. Ruthless Racing 10-11-2007, 05:01 PM Would it be possible to have all of the K7 1K owners/racers here e-mail www.gatlinracing.com to inquire about making this seat available for the 2007 1K? As it stands now, the seat is only available for the '05-'06 and looks far better that the alternative, Catalyst racing seat pan. I'm pretty sure the 05-06 seat pan from Gatlin will work on the 07. twowheelwerkz 10-11-2007, 09:43 PM you can have a stock seat pan recovered in high density foam a anew cover made. here is a pic of the seat off a 04 gsxr 1000 http://i243.photobucket.com/albums/ff297/twowheelwerkz/cutseat002.web.jpg http://i243.photobucket.com/albums/ff297/twowheelwerkz/cutseat001.web.jpg TRBLNKC 10-11-2007, 11:50 PM I found a site that had part numbers for both seats and they were different, however; looking at both seats from the top, they look identical to me. The bottom mounting tabs could be different though. Can someone post pics of the mounting tabs, (bottom of seats) on the '05-'06, and '07 seats for comparison? Ruthless Racing 10-12-2007, 07:15 AM I found a site that had part numbers for both seats and they were different, however; looking at both seats from the top, they look identical to me. The bottom mounting tabs could be different though. Can someone post pics of the mounting tabs, (bottom of seats) on the '05-'06, and '07 seats for comparison? They are the same.;) TRBLNKC 10-12-2007, 10:20 PM Kenny @ Ruthless Racing, Do you have any pics of your '07 GSXR 1K seat bottom that you could post here for comparison to the Gatlin Racing seat? I also sent you a PM. Thanks Ruthless Racing 10-13-2007, 10:19 PM I'm sorry guys the 05-06 seat is a tad bit different than the 07. My bad.:hammer TRBLNKC 10-16-2007, 10:26 PM I'm sorry guys the 05-06 seat is a tad bit different than the 07. My bad.:hammer What part of the '07 seat is actually different then the '06, is it the rear mounting tabs? Are the front mounting tabs the same? Ruthless Racing 10-17-2007, 10:26 AM What part of the '07 seat is actually different then the '06, is it the rear mounting tabs? Are the front mounting tabs the same? Yes and yes. TRBLNKC 10-18-2007, 10:39 AM Thanks! | ||