I have a k2 with a Kerker slip-on. I haven't drag raced it before. What do you think it will run in an 1/8? I would like to do a 1/4 but there is not one around. What rpms should I launch at?

Where it is your first time out, I will say that you will run high 6's in the 1/8th. The best way for someone new to launch, is to launch just like if you were leaving a red light aggressively. After you get the feel for it a little, then work your way up on rpm. This is probably the best way to start out and not end up looping it.

Where it is your first time out, I will say that you will run high 6's in the 1/8th. The best way for someone new to launch, is to launch just like if you were leaving a red light aggressively. After you get the feel for it a little, then work your way up on rpm. This is probably the best way to start out and not end up looping it. Yep that is correct........:)

they said it . 6.9 when i had no clue stock wheel base lowered.

i run 6.50@128 on '02 750 lowered, strapped, slip-on m4, geared 1 tooth down front. that 1000 should at least be runnin 6.65!

128mph, doesnt sound right should be more like 115mph

128mph, doesnt sound right should be more like 115mph Yep i agree with you on that, i had a buddy with a 03 zx12r with a 1270 kit, cams, headwork, pipe, powercommander, stoke crank, and his MPH was like 120-125 in the 1/8 mile, so that couldn't be right

Thats a 5.XX mile an hour. zx-10 on juice 5.7@ 130mph

128 mph in the 1/8? W/those mods that makes you a liar.

I weigh 125 lbs no gear. On my 12, lowered/piped/pc, -1 front I run 6.3 @ 118. Spraying in 2nd = 120 mph...a lil more still left in it. I'm on sea level

Yet somehow you managed to trap 8 mph higher than me?

BS

A.

well i need help my best was a 6.95 with a reaction of .8890 i know thats like a 6.6 if i had a better reaction but i couldnt get it there my avg reaction is a .6 i have a few .503-.580's but my times were in the 7.00's still. my 60 ft times were anywere from 1.8-2.0