Does anyone know for absolute certainty that this will work on the K6 600/750s?

http://www.watsendesign.com/products/current/PLATEHANGER/index.htm

I really like it, but really don't want to waste a couple dollars and weeks on it. : )

Went down to Crappy Tire and spent $0.88 on some 1" x 1" 90-deg things, hardware section. Removed fender and used the fender bolts to hold these things in were the fender was, two back holes. Drilled the plate to match and done. Took maybe 10 mins.

Went down to Crappy Tire and spent $0.88 on some 1" x 1" 90-deg things, hardware section. Removed fender and used the fender bolts to hold these things in were the fender was, two back holes. Drilled the plate to match and done. Took maybe 10 mins.

I did the same thing.............I think it looks good :cheers

whatever u do make sure u have a plate light... getting a
sticker without one is a pain

You lost me on the sticker/plate light thing?

In Florida the statute doesn't particularly state that you have to have a light shining on your plate, just that "the plate has to be readable from 100 ft away", bike plates aren't readable at that distance no matter what - so its a catch 22.....my brake light will be the illuminator. : )

Well here in mass the plate needs to lit up and in the stock location so altho I am kicking my self in the ass I bought the evo tech

So I assume you guys cut the license plate wires? I was trying to figure out a way to get them out of the fender without cutting them, but I don't see a way to do it. Just wanted to make sure that's what everyone else is doing.

So I assume you guys cut the license plate wires? I was trying to figure out a way to get them out of the fender without cutting them, but I don't see a way to do it. Just wanted to make sure that's what everyone else is doing.

i can't remember which member post it, but i thought he said there is a connector for the plate light in the tail section. He said no need to cut the wires. I thought i read that?:confused

Yes there is a plug I think it is under the tool kit somewhere, i cut mine when i tried making my make shift emilinator. that didnt work out that well.

For the time being I removed my passenger pegs (dont need them) and just bolted a 90 bend of aluminum using the allen bolts then bolted my plate to that. Only thing is I dont have a light.

Does anyone know for absolute certainty that this will work on the K6 600/750s?

http://www.watsendesign.com/products/current/PLATEHANGER/index.htm

I really like it, but really don't want to waste a couple dollars and weeks on it. : )

THIS WILL NOT FIT ANY OF THE 06 MODELS. I EMAILED KATHRINE AT WATSENS AND IT DISCONTINUED ANYWAY.

Sucks for sure!

Yes there is a plug I think it is under the tool kit somewhere, i cut mine when i tried making my make shift emilinator. that didnt work out that well.

For the time being I removed my passenger pegs (dont need them) and just bolted a 90 bend of aluminum using the allen bolts then bolted my plate to that. Only thing is I dont have a light.

I found the plug but I can't even pull the wires through the holes in the under tray or the fender with the weather proof sheathing on it! I will likely get an LED light later on anyway so I think I will just cut it. I want that fender off, it's FUGLY!!

I took some 1/2 aluminum, bent them, and drilled holes accordingly for $3.14 at Home Depot....you cant beat:cheers

I have a pic of it but its too big for the forums:mad

If anyone can figure out how to get that wire out with out cutting it for the 06 GSXR600 could they post how to do so I really dont want to cut the wire

I just fixed up my rear end today. I went for the evotech even though it is a bit pricey. I went ahead and cut the wire that goes to the stock plate light, it won't hurt anything if you cut it where it enters for the light. It gives you plenty of wire for when you install a different tail end and light.

I just fixed up my rear end today. I went for the evotech even though it is a bit pricey. I went ahead and cut the wire that goes to the stock plate light, it won't hurt anything if you cut it where it enters for the light. It gives you plenty of wire for when you install a different tail end and light.

Awesome i am waiting for my kit to arrive now.

I didn't have the time for fabrication, so here is Grave's solution...
LED coming this week for legality. ;)


Caio,

I got a couple L shaped brackets from Home Depot and bolted them on. It looks SUHWEET and very clean. Cost less than three bucks.

Forget the white connector. You can disconnect it and then what? There is no way under the sun it can be pulled through that tiny hole even if you dismantle the whole tail. Forget it just cut the wires.

The connector will fit thru the little hole. You only need to do this if you plan on someday putting the mudflap back on for whatever reason. Otherwise cut it.

Lou

agreed .cut it off, i did, bought sone pre cut l brackets off ebay for 6 bucks, works great.

Yes there is a plug I think it is under the tool kit somewhere, i cut mine when i tried making my make shift emilinator. that didnt work out that well.

For the time being I removed my passenger pegs (dont need them) and just bolted a 90 bend of aluminum using the allen bolts then bolted my plate to that. Only thing is I dont have a light.

same thing here.. i just need a light :)

can you guys post some pics of yours, so we can compare them, if you need the picture to be smaller I can do it on photoshop, just PM me.

If your worried about a plate light then the evo tech fender is the way forward. Some pics:-
http://x11.putfile.com/4/1110728429.jpg (http://www.putfile.com)

http://x11.putfile.com/4/11107292649.jpg (http://www.putfile.com)

http://x11.putfile.com/4/11107281447.jpg (http://www.putfile.com)

Its easy to fit and there is no need to cut the wire cause mine just slipped out the little whole on the undertray. Looks the part when on and worth the money for a proffessional looking job.

Evo tech....I did a search and only found car tuner........got a link?

Evo tech....I did a search and only found car tuner........got a link?
I bought the elimnator off ebay.
This is the auction LINK (http://cgi.ebay.co.uk/2006-SUZUKI-GSXR-600-750-TAIL-TIDY-06_W0QQitemZ8057484941QQcategoryZ10534QQtcZphotoQQ cmdZViewItem)
They ship worldwide too, theres another thread with someone in the states wanting to sell there's.

I am sending it back if someone wants to buy it PM me, it is going back on Monday
Here is the Thread
Hope this post is of some help.

HERE IS MY 2 DIFFERENT FENDERELIMINATOR KITS:

http://209.61.143.180/photos/S06GSXR600750STD-2.jpg

this one might not be legal in your state... but hey it looks good.

http://209.61.143.180/photos/S06gsxr6007500ss-2.jpg

that second one looks nice. I gotta figure out if thats legal here in so cal though.

HERE IS MY 2 DIFFERENT FENDERELIMINATOR KITS:

http://209.61.143.180/photos/S06GSXR600750STD-2.jpg

this one might not be legal in your state... but hey it looks good.

http://209.61.143.180/photos/S06gsxr6007500ss-2.jpg



In the 2nd pic where is the plate mounted, downstream on under the tail? how much for the 2nd kit shipped to NY?

i just got mine, i was going to make one but realized I dont have the time, so I just bought one!

forgot the night time pics.

HERE IS MY 2 DIFFERENT FENDERELIMINATOR KITS:

http://209.61.143.180/photos/S06GSXR600750STD-2.jpg


Thanks. I bought this one. I'm not a fan of the "tucked" type...to each their own, but it's actually illegal in CA.

juice, what kind of kit is that, how much and where do i shop for one? does it require and cutting or drilling? where does the stock wire go?

thanks

juice, what kind of kit is that, how much and where do i shop for one? does it require and cutting or drilling? where does the stock wire go?

thanks

It's this one:

http://209.61.143.180/photos/S06GSXR600750STD-2.jpg

thanks, definitely thinking of either bikelitez or the evo tech...still shoppin around and looking at the links to fabricate one up...i mostly like how these kits have lights...

juice, what kind of kit is that, how much and where do i shop for one? does it require and cutting or drilling? where does the stock wire go?

thanks

i didnt get it from bikelitez, i got it from local suzuki dealer in my area. It was 80 bucks. Its similar to the bikelitez. i used the stock wiring to connect to it. It took about 10 mins.

if you want i cant take a better pic of it, let me know.

hey guys
here are the ones i sell on ebay if anyones interested, and yes i ship to the states no problem,and the rest of the world.
pluss im offering 10% discount to anyone who is member of gixxer.com , its not much i know but its the best i can offer due to overheads
http://stores.ebay.co.uk/DB-Race-Products
heres a picture anyway guys

cleanes 'kit' hehe :)

I talked to a sherif earlier and he was saying as long as the plate is visible, its legal.

what's up macblastr... Glad to see you made it into the site.. I will post my filler plate in the 1k section soon..

late.

48 cents for 2 brackets from Menards + a spare parking light bulb

welcome to the site Zaxos!!

48 cents for 2 brackets from Menards + a spare parking light bulb

excuse me for being a noob over here but where is the bulb in the pics?

anyone know if the bikelitez ss kit that's in front of the tire requires drilling? anyone have it? happy with it? Thanks!

yes you have to drill 3 holes! it is not legal in alot of states, like mine, but thats the one i use.

excuse me for being a noob over here but where is the bulb in the pics?


Look closer at the second picture, you will see the original wire coming out and connected to a black light bulb. The whole thing is kind of covered by a piece of plastic (L shaped) to not make it visible. and then the whole thing is attached with velcrow to the bike so it can be easily removed.

welcome to the site Zaxos!!


Nice to see you again Juice. How is it going?
Just came here last night and liked it more than sportbikes so I registered.
A lot of things that I had issues with I see others having them too........FI light, sprockets...etc.

yes you have to drill 3 holes! it is not legal in alot of states, like mine, but thats the one i use.


how is the fit and finish? i love the way it looks, just a little worried about drilling into my baby, lol. plus worried the man will pull me over, and if i have to switch to the more conventional one, what will the holes look like? :scratch

if you take the SS kit off then the holes you drill will look like shit! Just being honest... but that piece is probably not too expensive if you HAD to replace it... if you are worried about the local authorities, then i would NOT put that kit on.

Look closer at the second picture, you will see the original wire coming out and connected to a black light bulb. The whole thing is kind of covered by a piece of plastic (L shaped) to not make it visible. and then the whole thing is attached with velcrow to the bike so it can be easily removed.

Cool, love the do it yourself versions! But you obviously didn't sew the velcro to the bike!!! So did you use krazy glue or did you use the pre-adhesive type velcro? (save me a trip to the store) Thanks!!

Cool, love the do it yourself versions! But you obviously didn't sew the velcro to the bike!!! So did you use krazy glue or did you use the pre-adhesive type velcro? (save me a trip to the store) Thanks!!


Pre-adhesive velcro I think A coupl e$'s for 6 patches at walmart. Did not want to put any glues, and the idea was to remove it if needed without any signs on the bike. After 2 months it is still there as the first day

This is the one I did today. Cost around $6.00

Used a plate light setup from Advanced Auto and a few L-brackets from Lowe's. Painted it all black.

Nice, how does that light look from the back? Does it hide away in the black.
I lik ethat you used the rear bolts, I think it gives it a cleaner look.

It looks pretty clean from the back. All the wiring is hidden under the new light and run up into the tail.

looks nice

Thanks. Much nicer than that stock fender!!!! Next up will be a PCIII and an exhaust.

Some pics of my homemade brackets. L stock aluminum from Homedepot. If you loosen the tail and pull the plastic back a bit, you will find the tag light plug about halfway to the front seat on the right side behind the servo motor.
http://i30.photobucket.com/albums/c342/garysol1/IMG_3083.jpg
http://i30.photobucket.com/albums/c342/garysol1/IMG_3084.jpg

Looks nice. What are those two straps for?

Looks nice. What are those two straps for?

I use a tail pack alot and I loop my rear bugee hooks into those.

Here is a pic of the one I made. I just made a bracket and then used the stock plate holder thing. Ez as pie and looks good. Dont mind the light wire I still have to hook up the plate light or take it out. Dont know what I will do yet.

What tail pack do you use? I may need one if I intend to carry anything larger than a toothbrush. :)

Garysol...i did the same thing with mine... L brackets from home depot, but I used the stock bracket, and just cut off the ends where the reflectors went. Any idea what the state requires as far as a light though?

Garysol...i did the same thing with mine... L brackets from home depot, but I used the stock bracket, and just cut off the ends where the reflectors went. Any idea what the state requires as far as a light though?

Oh I bet there is some legal requirment but I don't think I will worry about it till I get pulled over. The tail light shines on it pretty well so maybe that will be sufficiant.

Yeah, hopefully LOL I am just north of Chattanooga, and have no idea if I need to have a light on there or not. Guess I should check... Dont need to give the Police any reasons I guess :)

Yeah, hopefully LOL I am just north of Chattanooga, and have no idea if I need to have a light on there or not. Guess I should check... Dont need to give the Police any reasons I guess :)

http://www.carolinaclassictrucks.com/merchant2/graphics/00000001/litebolts/ledlightbolts.jpg Maybe an easy solution....You think?

I saw those in a Jegs catalog Was thinking about trying them. Wonder if anyone on here has any experience with them?