Last week I read a thread on a member who fabbed a sweet bracket for a fender elim. He was making a batch to sell and now I can't find it. I want a black powder coated one. :cool Any Help would be great!!

They are all gone already.

I've ordered this. It should keep the rozzers off my back as it's got a light above it:
Oh yeah, it's canadian $, so relax. Should be $10.95 U.S. :

http://www.topendz.com/cgi-sys/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=TMAAA&Product_Code=LP0022BK&Category_Code=TT (http://www.topendz.com/cgi-sys/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=TMAAA&Product_Code=LP0022BK&Category_Code=TT)

I am not 100% these would work, ride a dinosaur ;), have any of you considered one of Watsen Designs sweet brackets?

http://www.watsendesign.com/products/current/PLATEHANGER/index.htm

together with this

http://www.watsendesign.com/products/current/InternalPL/index.htm

it should be perfect - except they are not cheap. I have some of his products and though it takes a while to get them in yuor hands, to me they were worthwhile. Usual disclaimers apply.....

that watsen hanger is badass

They are all gone already.

Damn that sucks!!! I liked the simple clean look. Any chance some more might be made? :D

I've ordered this. It should keep the rozzers off my back as it's got a light above it:
Oh yeah, it's canadian $, so relax. Should be $10.95 U.S. :

http://www.topendz.com/cgi-sys/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=TMAAA&Product_Code=LP0022BK&Category_Code=TT (http://www.topendz.com/cgi-sys/mivavm?Merchant2/merchant.mvc+Screen=PROD&Store_Code=TMAAA&Product_Code=LP0022BK&Category_Code=TT)



$75.00 canadian is equal to $10.95 US?

$75.00 canadian is equal to $10.95 US?


$75.00 Canadian is about $65.00 US dollars.

take a look on ebay thats were i got my evo-tech. its from the uk and a
little pricey but looks damn good

take a look on ebay thats were i got my evo-tech. its from the uk and a
little pricey but looks damn good

How long did it take you to get yours from evo-tech? I have been waiting forever!:hammer

They are all gone already.


So those who got them how cool are they? You guys have lights on them? Anybody know if ArcDevilz still has a "pre-Order" list?

I dont know how they are all gone he said it would take about 2 weeks to complete them and that was a couple of days ago.

They looked good for about 50 bux

I dont know how they are all gone he said it would take about 2 weeks to complete them and that was a couple of days ago.

They looked good for about 50 bux
Oh that was me. I sent the pattern for laser cutting and then deburring and powder coating. I will be getting the test cut tommorow to see if it is to specs. Should be done in about two - three weeks. Shoot me a PM if you want in. I sent out for 100 of these to get laser cut. :cool

Oh that was me. I sent the pattern for laser cutting and then deburring and powder coating. I will be getting the test cut tommorow to see if it is to specs. Should be done in about two - three weeks. Shoot me a PM if you want in. I sent out for 100 of these to get laser cut. :cool


i am going to make my own for the time being, getting the bike tomorrow and cant ride with that ugly mud flap thing

i am going to make my own for the time being, getting the bike tomorrow and cant ride with that ugly mud flap thing


I would like to make my own fender eliminator kit myself....Do you know where I can go to get some information on how to do this...or is the process simple enough to where someone can just quickly tell me what to do?


Thanks.

about a week and a half

In my opinion, you are better off just making your own opposed to paying 80+ for something that you can make for much less. Its only a license plate....

watsen kit for sure. damm, the plate LED's are sweet as well

ArcDevilz i may be interested if its considered streat legal and came with some kind of light. You got any pics of it with a light?

I just ordered that evo-tech one for the 06 600-750 suzuki gsxr.

Good enough for me, not really looking to drill my new bike. (whenever it arrives... HA!)

Why spend so much money?? I dont get it. I spent maybe 10 bucks at ACE and made my own little bracket and situated it so the tail light will illuminate it. Clean, simple, and cheap! Now I can take that money that i didnt spend, and fill my bike with some gas!

I would like to make my own fender eliminator kit myself....Do you know where I can go to get some information on how to do this...or is the process simple enough to where someone can just quickly tell me what to do?


Thanks.


From my understanding all you have to do is remove the flap by unbolting it then cutting the stock rear light and tucking it under the rear fairing.

Then get some gauge aluminum and cut it to fit, bolt it to the bike by using the stock holes and bolts. then bolt the plate to the aluminum, paint it black and you are good to go.

i dont mind spending the money but i dont really like any eliminators on the market right now so this will be fine, ANYTHING is better than the damn flap, IMO

Just get creative! I just walked through ACE to see what i wanted to use, i ended up with some 1"x1/8"x3' aluminum and some huge black shrink wrap. Cut, bent and drilled the aluminum how i wanted it, then covered it in shrink wrap instead of painting it (scratch resistant!!) and i was done!

so can the 2005-1000 fit onto the 600? the tail looks the same...

From my understanding all you have to do is remove the flap by unbolting it then cutting the stock rear light and tucking it under the rear fairing.

Then get some gauge aluminum and cut it to fit, bolt it to the bike by using the stock holes and bolts. then bolt the plate to the aluminum, paint it black and you are good to go.

i dont mind spending the money but i dont really like any eliminators on the market right now so this will be fine, ANYTHING is better than the damn flap, IMO


Thanks...I am gonna try it. If there is an easier cheaper way to do things...im all for it !

I vote for the watsendesign one - its only 30 bucks.....thats pretty nice, and they'll paint it to match for you. Just sucks they are all the way up in Canada. : )

I actually took my STOCK mounting bracket and made two little 90* brackets... works perfectly. I'll take picutres tonight.

Seriously, an hour of your time and a tin snips.... that's all it takes

take a look on ebay thats were i got my evo-tech. its from the uk and a
little pricey but looks damn good

I just ordered one of those... :)

I did the same thing Jesse Boyer did it work out really well. Cost me ZERO dollar's used all the bolts from my fender, and even made some ruber wasers from that big rubber thing on the stock light to protect the plastic from the metal. Nothing needs to go to waste

thats a no on the gixxer 1k or 04 05 650/750 fendereliminator kit fitting. totally different.

I am returning my evo tech, check my thread