I have 04 750 does anybody have info on swapping cams from a 1000 to my bike

acorrding to schnitz the 1000 cams will work on your bike,of course you will need to get adjustable cam gears follow the link just a little ways down the page.

http://www.schnitzracing.com/technical_corner.htm

just buy a nice set from web then you will get the best performance. oh and know how to adjust your valves and degree your cams before you try...

From what year "1000" engine should I use the cams from.

03 or 04 will fit your bike !!

And here are your cam sprockets
http://gsxrzone.com/sprockets.html#anchor995902

I might have cams from a 03 avalible soon... upgrating myself.
PM me if you are interested.

01-04 1000 cams have the same profiles so your good with any set.

gsxr6boy how is your project going

Oh I am back to stock 600 cams. I had way to many troubles and now my cam chain seems to be stretched and whines a bit. I'm going to save the tooling for the drag bike I am building this winter :^>

Not too hijack this thread but another cam option.

I have a set of Yosh cams from an 01 1000 (will fit the 03)for sale with the adjustable sprockets. $125 TYD lower 48. The Yosh cams do not make a ton of hp, but a nice bump in the mid range and little more on top. 3-5hp is about average, some have seen a few more with thin gasket and a little more compression.

The Web 540/566 make more but of course cost more as well and do not come with sprockets. I switched too them to take advantage of the 3mm overbore and ported head.

The 750 cams prolly will make similar hp as the yosh stage 1's give or take a 1-2 hp depending on who degrees and what number they are set at

if interested my e-mail is rickgregory_2000@yahoo.com Iam in Jacksonville Fl and can ship anywhere through my work and take Paypal

Rick
904-470-7376

Read my post in y2k gixxers and beyond about the cam swap... let me know what you think....

Don't put both 1K cams in your 750. Move the exhaust cam to the intake side. Get the intake cam from the 1000 and put on the exhaust side of yours. Get adjustable cam sprockets and tune it :cheers

Don't put both 1K cams in your 750. Move the exhaust cam to the intake side. Get the intake cam from the 1000 and put on the exhaust side of yours. Get adjustable cam sprockets and tune it :cheers

you have it backwards....you take your intake and move intake to the exhaust side and get a 1000 intake and put it on the intake side..