|
Luckey strike 04-22-2002, 06:36 PM So what have you done to your bike so far?. My 93 1100wp riser and renthal motorcross bars. alloy fork clamps for twin bates lights. mircon pipe. K and n filters to go on when the jet comes. Looking at fitting a vfr750 single sider and wheel. and a R1 seat.repaint this winter. images/icons/cool.gif damige 04-25-2002, 08:58 AM I am building up a bike at the moment, 85 750 Gixxer, it has been striped down to the very last nut and bolt, The frame, sub frame and swing arm where striped and i powder coated them in a ripple black finish,the rear sub frame and tail is TL1000R and is going together nicly at the moment, finished some of the wiring last weekend an fired up the engine (fired up straight away) images/icons/grin.gif , Just waiting on top triple clamp which is being made for me at the moment. I will try to get some pics up soon. Lemmy69 04-26-2002, 02:20 AM Hi Guys! images/icons/grin.gif I have a GSX-R 1100 Streetfighter: Modifications so far: polished frame Harris streetfighter mask Moko swingarm Remus high mount exhaust Rairotec footpegs custom paint, airbrush Valentino Rossi sun on the tank the tail is still original but I'm going to go for a Big-Bike tail. images/icons/wink.gif Take a look at their site: http://www.big-bike-online.de/ Enjoy the weekend! Ride free and take care! See ya! Lemmy69 [ 04-26-2002, 12:20 AM: Message edited by: Lemmy69 ] Andy James 04-26-2002, 01:22 PM well still covereed in fairings but -> Braced arm Maxton shock Dyno jet stage 3 K&N twin filters Full micron race system , all fittings replaced with stainless and mid baffle removed Special paint One off twin back lights Bandit 1200 cooler and lines Polished everything that can be ! Flush indicator things carbon clock suround and battery box covered etc It's a shiny, noisy, fast wobbly thing Andy images/icons/grin.gif images/icons/grin.gif images/icons/grin.gif Luckey strike 05-01-2002, 05:27 PM Originally posted by damige: I am building up a bike at the moment, 85 750 Gixxer, it has been striped down to the very last nut and bolt, The frame, sub frame and swing arm where striped and i powder coated them in a ripple black finish,the rear sub frame and tail is TL1000R and is going together nicly at the moment, finished some of the wiring last weekend an fired up the engine (fired up straight away) images/icons/grin.gif , Just waiting on top triple clamp which is being made for me at the moment. I will try to get some pics up soon.<font size="2" face="Verdana, Arial">Come on then wheres the pics Tim graemlins/icon_wtf.gif damige 05-07-2002, 08:22 AM ok heres an update the engineer stuffed me around now for 9 weeks and now its being made by someone else and i should have it next week and over the next two weeks i should have everything back from the painters and i have made up the rear section of the exhaust and mounted the muffler and the led tail lights are just about ready as well. images/icons/grin.gif images/icons/grin.gif i have some pics up here http://photos.yahoo.com/bc/damige/lst?.dir=/&.src=ph&.done=http%3a//photos.yahoo.com/&.view=t Luckey strike 05-08-2002, 02:14 AM Originally posted by damige: ok heres an update the engineer stuffed me around now for 9 weeks and now its being made by someone else and i should have it next week and over the next two weeks i should have everything back from the painters and i have made up the rear section of the exhaust and mounted the muffler and the led tail lights are just about ready as well. images/icons/grin.gif images/icons/grin.gif i have some pics up here http://photos.yahoo.com/bc/damige/lst?.dir=/&.src=ph&.done=http%3a//photos.yahoo. com/&.view=t (http://photos.yahoo.com/bc/damige/lst?.dir=/&.src=ph&.done=http%3a//photos.yahoo.com/&.view=t)<font size="2" face="Verdana, Arial">The photos look great!!! put use some more up when its done graemlins/thumbup.gif Tim Luckey strike 05-08-2002, 02:19 AM Originally posted by Andy James: well still covereed in fairings but -> Braced arm Maxton shock Dyno jet stage 3 K&N twin filters Full micron race system , all fittings replaced with stainless and mid baffle removed Special paint One off twin back lights Bandit 1200 cooler and lines Polished everything that can be ! Flush indicator things carbon clock suround and battery box covered etc It's a shiny, noisy, fast wobbly thing Andy images/icons/grin.gif images/icons/grin.gif images/icons/grin.gif <font size="2" face="Verdana, Arial">Hi Andy what have you done with your ext can ive got a full micron on my 1100 has it improved it ? Tim graemlins/idea.gif Andy James 05-14-2002, 01:49 PM The full micron has smoothed the power so it felt slower at first. I never had the standard pipes but did have a knocked up micron carbon can (CBR600) and mild steel pipework which caused a huge flatspot..........things are better now though I'll chuck it on a dyno in a few weeks time I guess and will post the results Andy images/icons/grin.gif images/icons/grin.gif images/icons/grin.gif | ||