|
Mad Mike 11-21-2005, 03:36 AM ok my friend blew his motor up at the track the other night. and he has a spare 600 at his house to play with. does anyone have some advice on what he could do to beef his spare up... pistons, cams ect. and i know, he should go ahead and put a 1000 in there, i agree, but he doesnt wanna be adapting everything. any advice would be apreciated thanks mike http://www.gixxer.com/forums/images/graemlins/cheers.gif TurboBikeANF 11-21-2005, 09:04 AM Turbo... want to get the most out of that 600 throw a turbo on it....hands down spank that 1000cc motor Souperfly 11-21-2005, 10:00 AM Turbo... want to get the most out of that 600 throw a turbo on it....hands down spank that 1000cc motor You can't be serious...... http://www.gixxer.com/forums/images/graemlins/spit.gif My friend put a turbo on his 636 then talked mad shi!t about how he was going to waste me... Wasn't even close on three runs, two from a stop and one at 55mph... Tim Radley 11-21-2005, 06:40 PM Cams, clean the ports and tighten the combustion clearances should see some nice gains and a good torque curve | ||