good pass on my1K [Archive] - Suzuki GSX-R Motorcycle Forums Gixxer.com

: good pass on my1K


oldgixxer
10-28-2005, 10:32 PM
The bike was STROLLING at the track.
Stock arm,wheel pulled back w/2 master links
210lb rider,me http://www.gixxer.com/forums/images/graemlins/smirk.gif
did have a 130lb jockey make a pass and his mph was just a smidge shy of 160 http://www.gixxer.com/forums/images/graemlins/ooo.gif
Clutch is fuckin gone now,probably wasn't adjusted properly the last time at the track.It's a far cry from my Busa clutch http://www.gixxer.com/forums/images/graemlins/frown.gif
Anyway,here's the timeslip
All motor,no spray
http://www.gixxer.com/uploads/timeslip_0020.jpg

READY2RIDE
10-28-2005, 11:40 PM
not bad im hope to add some extras to my k5 and im hoping to run low 8s i only way 145 so im a paper weight

oldgixxer
10-29-2005, 01:30 AM
Low 8's??
Tell me what you have on yer bike&what you plan on doing to get it down to that #

Uncle Shittypants
10-29-2005, 05:25 PM
damn sub 9 seconds, hell yeah

B-dawg
10-30-2005, 07:54 AM
smokin pass, great 60 ft with your weight, thats haulin mail

mpdgsxr1000
11-03-2005, 06:44 AM
Low 8's??
Tell me what you have on yer bike&what you plan on doing to get it down to that #



type R stickers, a cool fender eliminator, and those ultra slick Tomahawk tires in yellow yo http://www.gixxer.com/forums/images/graemlins/rotflol.gif

Rockin C Racing
11-03-2005, 07:30 AM
Congrats OG. That is hauling a$$. Especially all motor and no juice.

Youngin
11-06-2005, 02:31 AM
Great ridin. How you hold that thing down

oldgixxer
11-06-2005, 09:59 PM
Great ridin. How you hold that thing down


The front wheel is in the air 1st,2nd,3rd&half way thru 4th gear.
Pretty cool lookin at the traps dead-smack in front of you as the bike is still holding the tire off the ground http://www.gixxer.com/forums/images/graemlins/thumb.gif

I have NO doubt this bike will run 50's with a nice arm on the back&shorter gearing

SPL170db
11-17-2005, 07:02 AM
Was this down at Englishtown OG?

I think I might want to come out some time in the spring to see your beast in action.

BallisticParts
01-07-2006, 12:18 PM
The bike was STROLLING at the track.
Stock arm,wheel pulled back w/2 master links
210lb rider,me http://www.gixxer.com/forums/images/graemlins/smirk.gif
did have a 130lb jockey make a pass and his mph was just a smidge shy of 160 http://www.gixxer.com/forums/images/graemlins/ooo.gif
Clutch is fuckin gone now,probably wasn't adjusted properly the last time at the track.It's a far cry from my Busa clutch http://www.gixxer.com/forums/images/graemlins/frown.gif
Anyway,here's the timeslip
All motor,no spray




Not bad......especially with a crap motor... http://www.gixxer.com/forums/images/graemlins/bounce.gif

Have you gone with a billet basket and 04 clutch coversion yet?

Dr Speed Lab
01-07-2006, 04:01 PM
The bike was STROLLING at the track.
Stock arm,wheel pulled back w/2 master links
210lb rider,me http://www.gixxer.com/forums/images/graemlins/smirk.gif
did have a 130lb jockey make a pass and his mph was just a smidge shy of 160 http://www.gixxer.com/forums/images/graemlins/ooo.gif
Clutch is fuckin gone now,probably wasn't adjusted properly the last time at the track.It's a far cry from my Busa clutch http://www.gixxer.com/forums/images/graemlins/frown.gif
Anyway,here's the timeslip
All motor,no spray






Have you gone with a billet basket and 04 clutch coversion yet?

Why, are the 05 clutches not holding up? http://www.gixxer.com/forums/images/graemlins/dunno.gif

oldgixxer
01-07-2006, 09:30 PM
The bike was STROLLING at the track.
Stock arm,wheel pulled back w/2 master links
210lb rider,me http://www.gixxer.com/forums/images/graemlins/smirk.gif
did have a 130lb jockey make a pass and his mph was just a smidge shy of 160 http://www.gixxer.com/forums/images/graemlins/ooo.gif
Clutch is fuckin gone now,probably wasn't adjusted properly the last time at the track.It's a far cry from my Busa clutch http://www.gixxer.com/forums/images/graemlins/frown.gif
Anyway,here's the timeslip
All motor,no spray




Not bad......especially with a crap motor... http://www.gixxer.com/forums/images/graemlins/bounce.gif

Have you gone with a billet basket and 04 clutch coversion yet?


No billet basket,but I'm switching over to a '04 set-up w/ ZX-10R plates http://www.gixxer.com/forums/images/graemlins/wink.gif

BallisticParts
01-08-2006, 01:33 AM
Dude......with as much power as you are making......I would definately suggest a billet basket.....and I am not sure what your doing with Kawi parts.....but the complete 04 clutch set up with a billet basket is good for well over 300hp. It's the ticket!

05 clutch is decent for road racing........but sucks for drag racing.......04 billet set up is the way to go.. http://www.gixxer.com/forums/images/graemlins/bounce.gif

oldgixxer
01-10-2006, 08:50 AM
After speaking w/ Lee,he broke down&gave me the dirty on his clutch set-up that was in his 100 S.S. bike.Over 200 passes w/ no failures.Thats where the ZX-10R reference came from http://www.gixxer.com/forums/images/graemlins/crazy.gif
Shhhh.....Dont tell anyone http://www.gixxer.com/forums/images/graemlins/wink.gif

Dr Speed Lab
01-10-2006, 12:21 PM
After speaking w/ Lee,he broke down&gave me the dirty on his clutch set-up that was in his 100 S.S. bike.Over 200 passes w/ no failures.Thats where the ZX-10R reference came from http://www.gixxer.com/forums/images/graemlins/crazy.gif
Shhhh.....Dont tell anyone http://www.gixxer.com/forums/images/graemlins/wink.gif

Are you using all the 10R steels and fibers? What kind of clutch springs do you use?

awd4g63
01-10-2006, 12:49 PM
Bad arse 60 footer http://www.gixxer.com/forums/images/graemlins/thumb.gif

Great pass, sweet setup http://www.gixxer.com/forums/images/graemlins/grin.gif

ruffryder21
01-10-2006, 05:29 PM
my 01 600 pulls better 60 fts' http://www.gixxer.com/forums/images/graemlins/smile.gif

E-RACER
01-10-2006, 06:57 PM
lol!!

But You have 2 more wheels than Him!! http://www.gixxer.com/forums/images/graemlins/bash.gif

Ruff..You like drama!! http://www.gixxer.com/forums/images/graemlins/crazy.gif

ruffryder21
01-10-2006, 10:22 PM
:-p ya but he has 400 cc's more and weighs the same or less than mine :-p sup e where ya been hows ur 600 puttin along.

E-RACER
01-11-2006, 04:27 AM
Sup?/Been around..I sold the 600 and Bought a 04 1000..


I had alot of fun on the 600 but needed more power!!

1.48 60 foot his size and stock arm is flying!!Not to mention 8's!!!!!!!

http://www.gixxer.com/forums/images/graemlins/thumb.gif

ruffryder21
01-11-2006, 03:43 PM
oh ya thats right.. i just got a huge insurance check so im thikin about droppin an 041k motor in my bike but i dunno.. that much work i might as well go to an auction or try to find one in the trader.. hey by chance do u know how much the 041k weighs wet? and the 051k? is it really that much better to drop an 04k1 motor into an 01 600 frame as far as weight is concerned? when we put mine on the scale with 1/4 tank of gas it weighed 365lbs... just curious.... what do u guys think about the 1000;s comin up in the prostreet class.. esp. team velocity.. u think the schnitz 500+hp bike will b able to hang?

E-RACER
01-12-2006, 05:58 PM
No I don't know how much they weigh..Im guessing around 430lbs wet??\\I actually have a buddie selling a nice 01 1000 for $5000..I have it listed here in the fs section look there for more details..

And the 600 is pretty much the same bike except the forks and some other small details..I would just buy the whole bike done..unless you get a deal on a 1k car kit..Trust me..The 6 will feel like a Moped after to ride/race on the 1000//and I hear the 05-06's have big power!!