|
fatcivicsi 09-19-2005, 09:47 AM I just replaced and rebuilt my clutch master cylinder and the damn thing wont build pressure i've been bleeding forever. Its like it wont push fluid down the hose whats wrong? http://www.gixxer.com/forums/images/graemlins/bash.gif Joe Voucher 09-19-2005, 11:09 AM Did you bench bleed it first? fatcivicsi 09-19-2005, 01:38 PM stupid question whats bench bleed? Joe Voucher 09-19-2005, 07:16 PM its when you hook up an adaptor to the master and feed the line back in to the resivoir. You SLOWLY squeeze the lever and release it slowly till you get all the air bubble out the master. You then mount the master and bleed the lines by PUMPING VERY SLOWLY, 3 TIMES, HOLD IT, AND BREAK LOOSE THE BLEEDER SCREW. If you pump quickly, you turn the big bubbles that would have come out very easily in to a bunch of lil bubbles that are a bitch to bleed out. PS; don't forget to tighten the bleeder screw before releasing gixxerfever 09-20-2005, 04:13 AM dude open the bleeding screw at the bottom by the actualtor and sphon the bluid down... should take a couple of sucks and once you see fluid continue the bleeding process fatcivicsi 09-20-2005, 02:03 PM thanks for the help guys i got it to work. it was my stupid ass that put the pushrod and bushing together wrong. i didnt let the lever retract far enough. gixxerfever 09-22-2005, 03:14 AM glad you did bro | ||