I am gonna sell my bike 00 hayabusa Blue/Silver

I have a 00 for sale bike is perfect no scratches no dents,it has a 1484 cc stroker, from top it has .405 int cam .397 exh cam ,aftermarket valve springs ,34mm intake valves(stainless) 27.5 mm exh valves (stainless) fully ported head, 84mm MTC pistons , falicon knife rods , 4 mm stroker crank ( it has been lightned, rebalanced , knife edged, and polished, crank looks like a chunk of chrome) it is called falicons super crank! It has lower case studs and high volume oil pump gear! trans is race prepped (under cut),it has an MTC multistage lockup clutch and the brock clutch cushion and adjustable cam for clutch lever. the fuel injection has been modified by LEE sheirts 46mm blades front bored out to 45mm, small box mod ,bmc race filter. Brock hindle pipe ,power commander,airshifter, shift light, schnitz tripple clamp, and r/c componet wheels, chassis is stock other than that . The bike has less than 900 miles on it. and less than 100 miles since engine was done!!!
leave your e-mail address and phone # here if your interested i will meet half way !

I am asking 15,000 obo for the bike it has everything you need to go fast!

Any Pics and Dyno #'s ???

Originally posted by SuperBusa:
I am gonna sell my bike 00 hayabusa Blue/Silver

I have a 00 for sale bike is perfect no scratches no dents,it has a 1484 cc stroker, from top it has .405 int cam .397 exh cam ,aftermarket valve springs ,34mm intake valves(stainless) 27.5 mm exh valves (stainless) fully ported head, 84mm MTC pistons , falicon knife rods , 4 mm stroker crank ( it has been lightned, rebalanced , knife edged, and polished, crank looks like a chunk of chrome) it is called falicons super crank! It has lower case studs and high volume oil pump gear! trans is race prepped (under cut),it has an MTC multistage lockup clutch and the brock clutch cushion and adjustable cam for clutch lever. the fuel injection has been modified by LEE sheirts 46mm blades front bored out to 45mm, small box mod ,bmc race filter. Brock hindle pipe ,power commander,airshifter, shift light, schnitz tripple clamp, and r/c componet wheels, chassis is stock other than that . The bike has less than 900 miles on it. and less than 100 miles since engine was done!!!
leave your e-mail address and phone # here if your interested i will meet half way !

I am asking 15,000 obo for the bike it has everything you need to go fast!<font size="2" face="Verdana, Arial">May I ask why you did all that work to it and you only put 900 miles on it?

It makes 225 rwhp,, it runs 8.80`s @164 stock wheel base! I dont have a digitial camera ,but I am working on getting some pics!

I Have decieded to do much the same thing to a 1000 . This year at bike week everyone and there brother had a busa, Not to mention a 1000 is 100lbs lighter than a bus , so if I can get close to about 210 rwhp out a 1000 I will have a better power to weight ratio, of course I will make that bike 58.5 long and put about 35lbs in the front fairing, I think I can make 1 fly!! images/icons/grin.gif

Oh yeah,,, sig187

I dont ride very much at all gas for it is 15.00 a gallon, and I bought the bike brand new in aug of 2000 and put about 850 miles on the bike and then went nuts with it! images/icons/grin.gif