I got K5 GSX-R 1000 few weeks ago, it's awesome!!

So I'm planning to install my Muzzys dry NOS kit I used in my K3 GSX-R 1000 previously. I use Techlusion TFi to supply enough fuel when running NOS, it activates when I push the button. Everything worked ok with my previous K3, I used #36 jet which means +50hp shot at the rear wheel.

So, does anyone now if someone has heard/tried +50hp shot in K5? Should it be allright? I was wondering, because K5 has more compression (K3: 12.0:1 -> K5: 12.5:1) and it has titanium valves.. I've heard that there might be some problems with the titanium valves, that the plate edges could crack?

Any help would be appreciated!

yes i too just purchased a k5 and would like to know about nitrou on it as i have it on my 01 600. are you running a direct port of fogging through the air filter?

I'm using dry NOS, so it sprays in the airbox next to inlet stacks below the airfilter.

http://www.muzzys.com/GSXR1000/gsxr1000_dry_nitrous.html

And survey says,,,,,,,,,,,,,,,,,,NO WAY! 50 hp on stock bike. A 36 jet = 40 hp. 38-40 pill would be 50hp shot. would not go higher than 34 size jet,( 30 hp) Speak to Ryan at Schnitz Racing .Com

Friend of mine is getting 50rwhp from his 50 shot on his 01 1K and has been running that for a long time now and its running great. Personally I wouldn't go over 30hp shot...