1) Air shifter or PC Quick Shifter ?
Breakdown of bike use:
70% Street
20% Drag racing
10% Stunt (or trying to)

2) If I lower the back with lowering links, should I also lower the front by bringing the forks through the triple ?
Or should I just strap the front down ?
Or both ?

3) Ask'd this one before, but still looking for some suggestions.
What do you guys use or recommend as far as tether switches ?

go with the air shifter, so if you want nos you can run it off the same bottle. as for the forks i slide mine down a couple inches then strap it as well. it takes me less then an hour to raise and lower mine. as for the tether you can screw the cord into the kill switch, thats what i seen my friend does on his bikes.

If you already have a PC, get the PC shifter. It is awesome and programmable. You won't have to worry about air refills, air leaking out at the wrong time, forgetting to open the air bottle or it not shifting your bike. It happens. and it sucks when it does!

mr potato head do you have the pc shifter and what results have you had from it in terms of drag racing.also how much did it cost and is it compaitable with the pc3 usb connect?

From what I've read on it, it can only be used with the PC3 USB.

Does the PC shifter come with an air-ram or a solenoid or something to do the actual shift-motion? Or is it just an ignition-kill so you can foot-shift without the clutch?

The PC is just a kill. You still have to shift it.

Go with a high pressure air shifter. I have been using one on my 02 Busa all summer. I still don't need to fill the bottle.

Here's another question:

Looking at some different companies lowering links, I've found 2 different materials.
One made from 7075-T6 aluminum and the other made from 6061-T6 aluminum.
Which is better ?
Or is it more of a personal opionion thing ?