redsilver
06-08-2005, 03:00 PM
First of all, I just wanted to shared a pic of my bike. I just installed my undertail cover and had to figure out how to put some new turn signals. Meanwhile, I wanted the tail to look unique and clean. After 2 days, I saw one of the post on license plate relocation. Thanks you the memeber for it. I brought a set of side markers from pepboys for $10, have a 3/8in piece of steel laying around. I use a vice-claim and bend the metal bar to the angle that would conforms to the rear of the bike. I took the black plastic backing from the lights and trace it to the metal and drilled my holes for the lights. I drilled to center holes for the mounting position. I painted using engine paint to much the aluminum of the bike. One the license plate however, I cut a piece of aluminum sheet to the side of the tag, drilled the mounting holes. I cut a small piece and bent it in an L shape a riveted it to the back. I mounted on the exhaust bolt. Finally, sorry this lenghtly post, but like myself when viewing a post, some of the ideas on the post doesn't seems to have enough directions on how to do things. http://www.gixxer.com/forums/images/graemlins/smile.gif http://www.gixxer.com/uploads/GSXR21.jpg http://www.gixxer.com/uploads/Picture_0477.jpg http://www.gixxer.com/uploads/Picture_0463.jpg