|
: how to make my own front signal lights the count 05-18-2005, 12:44 PM hi i see pics of peaples bike on the site.with front signal they made themselves.could any one please help and give info how they did it and what they used.what i mean are the flush mounts with the led in them.someone please help they look so cool.thanks http://www.gixxer.com/forums/images/graemlins/cheers.gif shortround 05-18-2005, 10:49 PM its a lockhart phillips signal size small. they are cut down using a dremel tool to just fit inside the hole. use the search to find instruction info. Blessed 05-19-2005, 12:11 AM check out a post I started a month or so ago. the count 05-22-2005, 02:23 AM what i would like is to have led front signal lights.how can i make these work and how would i do the wiring?Any ideas would be great thanks http://www.gixxer.com/forums/images/graemlins/dunno.gif shortround 05-23-2005, 12:04 AM you need a 330 ohm resistor for each led bulb. i'm thining of making a set. similar to the watsens but i haven't made a mold yet. i'll let you know if i get motivated. | ||