|
Blessed 05-12-2005, 07:22 AM Pic of some flushmounts i made with LP oval flushmounts http://www.gixxer.com/uploads/Picture_0049.jpg The old pics before I tweaked them http://www.gixxer.com/uploads/bike_front_(2)2.jpg Sorry the pic is kinda small Blessed 05-12-2005, 08:26 AM pics of the ones I used, only the ones I used are the clear. Can be bought for around $17 http://www.gixxer.com/uploads/lpflush4.jpg Razer66 05-12-2005, 08:36 AM how did you make the universal ones fit so cleanly inside of the stock turn signal holes? oh, and it looks sweet, especially for the price Blessed 05-12-2005, 08:38 AM how did you make the universal ones fit so cleanly inside of the stock turn signal holes? oh, and it looks sweet, especially for the price Made a pattern for the stock fair hole, then removed the outter lens, dremeled it down to size, re fastened and whamo. Razer66 05-12-2005, 09:53 AM i was thinking that was what you did, but wasn't sure. thanks, i am gonna go do that myself probably this weekend. shortround 05-13-2005, 01:29 AM you don't have to remove the lens. you can shave it down slightly to fit just inside the hole if you use a LP size small http://www.gixxer.com/uploads/Cnv01072.jpg avante 05-13-2005, 11:56 AM Damn both of those look sick http://www.gixxer.com/forums/images/graemlins/thumb.gif I'll have to try and do that also since gregg's and the watsons are soo expensive. I'd rather spend my money on more performance oriented mods. Nice work guys.! shortround 05-14-2005, 03:25 AM http://www.gixxer.com/uploads/Cnv0001.jpg http://www.gixxer.com/uploads/Cnv01043.jpg http://www.gixxer.com/uploads/Cnv00053.jpg hers a couple more pics the yellow is an 03 alstare http://www.gixxer.com/forums/images/graemlins/cool.gif Blessed 05-15-2005, 12:23 AM Shortround, we should open a business. 03 GsX-R 750 06-09-2005, 04:46 AM help! how did you guys make them flush??? did you trim away at the fairing on the inside to allow for the 'screw' part of the flushmount to fit??? i already trimmed the lens, but they wont go flush because of the screw part, its too long and too big to go inside the hole Blessed 06-10-2005, 10:23 AM yes, trim away the inside so that it will fit flush to the fairing. Rowell 06-10-2005, 01:45 PM HAS ANYONE TRIED THE SINGLE SIDED SWING ARM FOR A GSXR 750 2003. IM THINKING OF GETTING ONE. WHERE IS A GOOD PLACE TO GET ONE? NEED ALL FEED BACKS ASAP. THERE IS A BIKE SHOW COMMING UP AND I WANT TO GET IT IN FOR THAT SHOW. THANKS Rowell 06-10-2005, 01:51 PM HAS ANYONE TRIED THE SINGLE SIDED SWING ARM FOR A GSXR 750 2003. IM THINKING OF GETTING ONE. WHERE IS A GOOD PLACE TO GET ONE? NEED ALL FEED BACKS ASAP. THERE IS A BIKE SHOW COMMING UP AND I WANT TO GET IT IN FOR THAT SHOW. THANKS | ||