I wanted to start a thread for people to post their 2005 GSX-R 1000 1/4 mile timeslips or results.
In addition, please post any links to 05 GSX-R 1000 1/4 mile results or road tests found on the web (magazines, forums,etc.) here as well.

Thanks.

C'mon guys, let's see some timeslips! =)

Videos?
1st story observations?

go look in the drag racing forum http://www.gixxer.com/forums/images/graemlins/rolleyes.gif

sorry, havent gotten out to the track, but i did find this link. hope this helps http://www.gixxer.com/forums/images/graemlins/smile.gif

http://www.biketestusa.com/Article_Page.aspx?ArticleID=2086&Page=1

holy crap, youy brought back a 7month old thread.............one in which no one replied http://www.gixxer.com/forums/images/graemlins/ooo.gif

Ok,I feel bad for 427 C6,so here's a slip from my 1k,which was just posted a week or two ago
http://www.gixxer.com/uploads/timeslip_0021.jpg

Ok,I feel bad for 427 C6,so here's a slip from my 1k,which was just posted a week or two ago
http://www.gixxer.com/uploads/timeslip_0021.jpg



you time slip whore http://www.gixxer.com/forums/images/graemlins/spit.gif

155mph is insane!
What was your total cost for all of your mods installed?

$10,153.15,including tax,engine mods only http://www.gixxer.com/forums/images/graemlins/grin.gif
wheels,rotors,etc another $3,000
the bike only cost me $9,800 http://www.gixxer.com/forums/images/graemlins/wtf.gif

155 is with my 210lb ass riding,I'm sure it'll be closer to 8.60's@160 with a jockey on it http://www.gixxer.com/forums/images/graemlins/thumb.gif

Since you're not getting much in-put from the stockers, a decent pilot could dispense-out that Vette by 2 seconds and 25mph; that would be 9.8 and 148.

Since you're not getting much in-put from the stockers, a decent pilot could dispense-out that Vette by 2 seconds and 25mph; that would be 9.8 and 148.



PLEASE post stock timeslips for 05+ 1k's if you have them. =)
I'd really appreciate it.

If you are suggesting that more stock timeslips should be posted for the 05 1k, I agree.

If you are referring to the 06 ZO6 Corvette,
I believe you will see STOCK 10 second timeslips from good drivers with non-runflat tires, mid-low 10's w/ tuning+headers, and low 10's or better when combined with a cam. It's hard to believe unless you've seen with your own eyes what's being done with the LSx cars.

Still, nothing compares to the bike.
Period.

I dunno bout 10's bro...
one of the mags got an 11.7@125mph outta a new '06 Z06, .8 seconds is ALOT too drop,even with drag radials.Too bad they didnt post up there 60' time.
Maybe 11.40's with D/R's,but thats it for a stocker

r/t .207
60ft 1.736
330ft 4.438
1/8 6.551
mph 115.58
1000ft 8.401
1/4 9.980
mph 143.69

I was sleeping, just woke up. My bike was strapped, nothing else done, and the temp was around 100 degrees. I haven't been to the track since July. I'm on the right
http://216.77.188.54/coDataImages/p/Groups/148/148022/folders/95876/1730304NewestTimeslip.jpg

I don't have my slip with me to scan here at work, but on my K5 (mods - exhaust, PCIIIusb, strapped) my best is a 10.15 @ 140 mph and I weigh 210 lbs without gear.

I dunno bout 10's bro...
one of the mags got an 11.7@125mph outta a new '06 Z06, .8 seconds is ALOT too drop,even with drag radials.Too bad they didnt post up there 60' time.
Maybe 11.40's with D/R's,but thats it for a stocker




Hijacking here...but I do believe that you will being seeing some bonestock owners with a 10 sec. slip. It's just going to take a guy that's got some seat time and some really good air and it'll happen. I know that a few ls6 z06's were getting high 11's stock in some great air, and the rags were all getting 12's out of them. Just give it some time.

This is my last pass of this year...I was on the brakes...normally have a 148mph.
rt.- .064
60'- 1.671
330- 4.286
1/8- 6.341
mph- 119.87
1000- 8.131
1/4- 9.684
mph- 139.26

r/t .319
60' 1.753
330 4.451
1/8 6.573
mph 116.64
1000 8.396
1/4 9.949
mph 144.04

no burnout and only a couple times at the strip

rt - .594
60ft - 1.651
330 - 4.326
1/8 - 6.375
mph - 116.42
1000 - 8.231
1/4 - 9.767
mph - 144.54

rt 408 http://www.gixxer.com/forums/images/graemlins/smile.gif we run a pro .400 tree for bikes always
60 1.65
330 4.26
660 6.29
mph 119.87 mph

that was at my local 8th mile track

1/4 mile track its been

60 1.69
330 4.302
660 6.402
mph 119.27
no 1000 foot timers at this perticular 1/4 mile track
1320 9.69
mph 147.02

these runs were n/a ..i do have a nitrous kit on it..with a single #28 jet...tried it in the 1/4 but clutches were slipping pretty bad..did manage 123 mph in the 8th and almost 152 in the 1/4 ..but the et suffered bad. took the kit off and getting motor work done as we speak...

RT .032, 60' 1.722, 330' 4.311, 1/8 6.401, 1/8 mph 116.90, 1000' 8.232, 1/4 9.813 @ 138.97. Lowered and strapped. 16 tooth up front.

Wow your first post&reviving a dead thread from 6yrs ago:lol

ya now im faster

ya now im faster
Me,Im just older:biggrin

Me,Im just older:biggrin


gained 20 pounds :crying

Funny enough, while this thread sat dormant, 10-second timeslips were had out of bone stock C6 Z06's haha.

http://www.blogcdn.com/www.autoblog.com/media/2007/12/furman_slip_250.jpg

I met Jamie Furman at a private MIR rental this past November;not only is he a first class drag racer he is also a bike enthusiast& a hell of a nice guy..he was talking to me about all his bikes(and his huge car collection)&how ridiculously quick stock bikes are right off the showroom floor..I still had my temporary paper plates from the dealer on my Busa lol