To start with, my bike is an 07 750. 9k on the miles. My throttle was routed all funny, and had a little 90 degree angle bend in it, so I purchased some new ones, and found a thread explaining the routing. Put them on as described, and adjusted them as described. (adjustment up top is all the way in, and backed off 1 1/2 turns.) no matter how I adjust the lower adjustments it seems like it won't recoil back. Cables have even been. Carbon lubed for reassurance before I even installed them. Is there a trick here somewhere that I'm missing? Could setting be to tight on throttle bodies? I hate to big you guys but I'm dumbfounded. Any help is much is appreciated.

Thanks!
-Axl

Also, it is possible, maybe i still have them ran wrong.

Bump :)