Hiya Guys, thanks for your time

On my way to GP Bikes this weekend, and my lights stopped working. Now when pushing the pass button, the brites come on, but no lites when normal, or when switching to brites. The little bulb in the front does however come on.

I have checked the fuses in the little fuse box in the front (beneath clocks), and all fuses are cool.

Do any of you have any other ideas on what it may be, and knowing all of ya guys, there will deffinately be a solution (but not taping the pass switch down, as i have already done that)hehehehe, cheers guys, thanks for the help craig.vanstraten@siemens.co.za

pull the bulbs and check the filaments.

if they are intact, check your wiring to make sure the harness did not chafe against something and ground out on the frame or something like that

wheelies can break bulbs images/icons/smile.gif

Do you have stock bulbs???? I had Hyper Whites in and when it would get hot they would pop the low beam fuse. Look at the metal base of the bulb for a goldish tint. Also the bulb may look a little bit smokey inside. If that's not it look at the wiring harness on the left side of the bike or the switch housing where your high/low switch is.