02-08-2012, 07:04 PM
i have a 92 gsxr 750 , tore it down to go through it found all kinds of hack shit done , now i need to know if it is normal for the swing arm to have a 1/4" of slop ( moves side to side ) or if there is a bushing kit i will need to install ? thanks
02-08-2012, 07:09 PM
no slop should be caps on the ends off the swingarm
02-08-2012, 09:56 PM
either the pinch bolt through the chassis is incorrectly torqued, or the bearings in the arm are pooched would be my guess as to the things i would determine to begin with.
02-09-2012, 04:27 AM
it amazes me the lateral movement of the swingarm from the swingarm bolt to needle bearings then the swingarm preloaded adjustment reduces movement by a large amount
02-09-2012, 03:27 PM
pinch bolt lmao i figured it out last night , thanks though evey one , still learning ins and outs of a bike , if it were a lt1 camaro it would be annother story.