Anybody got metric dimensions on the length of the rear axle? I know dia is 32mm. Thanks.:scratch

Without physically looking at them. It should share the same dimensions as your K model.

Without physically looking at them. It should share the same dimensions as your K model.

Well, they would be great but I need confirmation on its exact length.:scratch

If you don't have that answer by the time I get back from my holiday. I'll confirm it.

Let me go get the measuring tape out buddy.......will be back shortly...

34cm is what i'm getting........hope this helps.

Anybody got metric dimensions on the length of the rear axle? I know dia is 32mm. Thanks.:scratch

My well used stock dia runs at 28mm.
The length from axle bock off edge to thread is 35/6 mm.

Measurement from outside to outside is 337mm.

On a '96 750.

Hope it helps, Ad

34cm is what i'm getting........hope this helps.

Thanks helps out a lot!:cheers

My well used stock dia runs at 28mm.
The length from axle bock off edge to thread is 35/6 mm.

Measurement from outside to outside is 337mm.

On a '96 750.

Hope it helps, Ad

Isnt' the axle dia 32mm? Thanks as well.

Can anybody else confirm the diameter and length of the rear axle?:wait

My well used stock dia runs at 28mm.
The length from axle bock off edge to thread is 35/6 mm.

Measurement from outside to outside is 337mm.

On a '96 750.

Hope it helps, Ad

Confirmed its 28mm, so why is a bearing with 32mm id listed for the rear wheel? 32x58x13 pn#09262-32008?