How much slack should there be in the clutch cable when bars are turned completly to the right. My wire is so tight, I believe I could snap the adjuster if I turned bars quickly. Please help. Also, anyone got any recomendations on a Ignition Advancer for a 97 600?

Worry more about the slack when the bars are str8... If you have it correct there, and the calbe is routed correct, then you shouldnt have any problems.

John

did you replace the cable or is this something that you just noticed?? I replaced my cable over the winter, i can really feal the difference, just make sure you route the wire the exact same way as it was.

If its really tight take off the laft plastic and check out the entire cable