The bike is k2
Like title, I just bougt a set of k5 cams and I am going to put the k5 intake on the intake, on the exhaust I am using the k2 intake cam.

Has anyone modded the stock sprockets and made them adjustable?

what should I deegre the cams to with those mods?
I am looking fore desent midrange and desent topend.

Yoshimura RS3 carbon
factory pro stacks 60mm
Rapid Bike efi, ignitione
bmc filter
X-ring chain
TRE
Baffle gone
Pair valve

Can I dropp the cams inn and check for vtp klerace, if ok then reasemble and just drive?

Thanks
Sverrir

Lol...if you slot your own cams and are .5mm out then you will soon know about it. Buy some decent adjustables.
Si

To buy some allready made is no funn.
Ptv check should avoyd it, but if I get it wrong and it brakes then it brakes.

i bought 05 cams to for my 03 they where almost spot on for degree, infact so close my motor build said dont bother with adjustable sprockets i might be able to get 1 or 2 more hp, and he knows i was planning on some yoshi type R's anyway............instead i just bought a motor with the type R's in it............and the kit pistions............and a lighten knife edged falcon crank...........and on and on lol

Did you notice a difference in power after the k5 cams install?

more midrange, i got a 5hp increase at top but almost a 10 in the middle, but i did both 05 cams the intake and the exhaust, i found out they are almost identical to a yoshi stage 1 drop in cam for our 01-04 engines.

Ok ill then just drop them in and check for ptv for this sumer atleast.
Thanks man