Anyone have a decent way to eliminate the rear fender and not look like a hack job? I want to use aftermarket short stalks also...any help would be appreciated (pics..etc)

i can help ya out. i did my buddies but i didnt keep tha stock turn signals. found better ones and it now makes him not look like tha little rookie he is! if ya want let me now and ill give ya tha list of stuff ya need to do it and step by step process. its easy and saves alot!

If you could email me any details to redr1pilot@yahoo.com,

I'd appreciate it!

www.ballmoto.com (http://www.ballmoto.com)

They have affordable eliminators, that will do exactly what you are looking for.

i built one out of aluminum and it even bolts up to the stock holes provided. the carbon signals i chose are on a bracket that is attached to the license holder and it looks pretty trick. i got a couple guys with the new 600/750 that want me to build em one. total cost was like $8 and $25 for the signals. took me an hr to do.

I built one from a piece of sheetmetal from work (I work for a stamping company). Cost was $1.04 for the black paint at Wal-Mart and a couple hours of work.

Fits into the recess that the stock fender did using the OEM holes.

thats the way i am planning on making mine backdraftmoto. we hvae to have the numberplate light and sutff here

yeah same in canada. i bought a couple of those LED license plate bolts and they be hella cooool!!

i just took mine off, then put my plate where the stupid mudd flap was bolted and customized some LEDS as turn signals...looks good,,,real good...

here's a couple pics of mine. just gotta paint the whole undertail white and round the signal bracket bottoms off and its done. http://www.bcsportbikes.com/photopost/data/500/25152004_0415_113011AA-med.JPG
http://www.bcsportbikes.com/photopost/data/500/25152004_0415_113030AA-med.JPG