PaulPearson
05-24-2010, 02:40 AM
Hello all new to the site looks very good. I'm Paul Pearson, DJ & club promoter and massive suzuki fan. I own a gsxr 600 k2 its my pride and joy. Just started doing my own work on her but one thing iv never attempted is alltering my chain.
I have noticed its slacker than it should be at minute so I want to alter it myself. Is it a 36mm spanner needed to unlock the one large locking nut? Can this be made tight enough by hand? To tigthen the tension you alter both sides with the nuts and screws and use the notches in the swing arm to make sure its the same distance on both sides?
Apologies for sounding a bit blonde but its something iv never altered myself and would like to service my own bike :) thanks for any help she's a k2 2001 gsxr600.
Cheers
PP
I have noticed its slacker than it should be at minute so I want to alter it myself. Is it a 36mm spanner needed to unlock the one large locking nut? Can this be made tight enough by hand? To tigthen the tension you alter both sides with the nuts and screws and use the notches in the swing arm to make sure its the same distance on both sides?
Apologies for sounding a bit blonde but its something iv never altered myself and would like to service my own bike :) thanks for any help she's a k2 2001 gsxr600.
Cheers
PP