Is there any way to adjust the OEM slipper clutch for back torque slip? I need the thing to slip a little bit more, it's forcing me to downshift under braking later in the braking zone than I'd prefer to avoid having the bike back itself in. I know there is aftermarket option but I'd rather not have to go that route. $$$.

Thanks.

You can adjust the lifter pins. Those 3 nuts and allen heads closest to the center.



http://mossimotoindustries.com/shop/images/106559-060.jpg

You can also adjust the wave springs behind the basket.

Is there a adjustment range on the lifter pins, or do I just guess? Anybody found a setup that works well?

I'm coming off a ZX-6R which had a excellent slipper clutch, if I can get anything near that on my K7 I'd be very happy with it.

Thanks.

I just replaced my clutch in my bike. I called kws to ask about the adjustments for the pins. this is what he told me.

Turn them in till you feel a very slight resistance. Then back it out 2 full turns and tighten the lock down nut. He also said that is just a base adjustment and to try it out then adjust it to my liking. After you set the base setting and try it if you need more slipping then turn the pins in less slipping turn them out. If you turn them in to far you will slip under power as well. Also make sure all the pins are set as close to the same as you can get them.

The search button is a beautiful thing... lol

http://i55.photobucket.com/albums/g121/jetspeedz/34.jpg

I did search....must have not used the magic word.

Thanks guys.

The search button is a beautiful thing... lol

http://i55.photobucket.com/albums/g121/jetspeedz/34.jpg

That is in the 05/06 sub forum :hammer. How do you expect him to find it in the 07/08 sub forum. :dunno

:flipoff Good job at being an ass hat :flipoff

Thanks for helping to prove the point that the fourm split was a bad ideal.


I did search....must have not used the magic word.

Thanks guys.

I searched as well before the forum split and didnt find anything about adjusting the 07 and up only 05/06. That is why I called kws to ask them.

allright, mine slipped under break in when I first got the bike. The problem "resolved itself" with a few miles but, when I tried synthetic oil, it returned. From this it looks like I can adjust it externally with just cover off. I was sure I'd have to pull the clutch to do this. Good info this. The FSM isn't exactly clear on this point.

Nevermind.

allright, mine slipped under break in when I first got the bike. The problem "resolved itself" with a few miles but, when I tried synthetic oil, it returned. From this it looks like I can adjust it externally with just cover off. I was sure I'd have to pull the clutch to do this. Good info this. The FSM isn't exactly clear on this point.

You can adjust them through the "plug" hole in the clutch cover. Adjust one then turn the motor over a little till you can adjust the next one and so on. Or you can remove the clutch cover and do it that way.

Right already did it, took 15 minutes. Took them out a bit further than the recommendation and we'll see how it works when I ride it later in the year.

That is in the 05/06 sub forum :hammer. How do you expect him to find it in the 07/08 sub forum. :dunno

:flipoff Good job at being an ass hat :flipoff

Thanks for helping to prove the point that the fourm split was a bad ideal.




I searched as well before the forum split and didnt find anything about adjusting the 07 and up only 05/06. That is why I called kws to ask them.

Hey fuck face.... I just typed in slipper adjustment in the fucking search box... and BINGO... up it comes.... there's no difference in adjusting it... had you done a bit of searching before you spewed off you would have found that this has been quoted numerous times in the 07 forum as well....
Thanks for helping to prove the point that you're a frigging moron, but somehow I think you already know that......

forgot to mention this one too..... in the GENERAL FORUM

http://www.gixxer.com/forums/showthread.php?t=202140

Hey fuck face.... I just typed in slipper adjustment in the fucking search box... and BINGO... up it comes.... there's no difference in adjusting it... had you done a bit of searching before you spewed off you would have found that this has been quoted numerous times in the 07 forum as well....
Thanks for helping to prove the point that you're a frigging moron, but somehow I think you already know that......

forgot to mention this one too..... in the GENERAL FORUM

http://www.gixxer.com/forums/showthread.php?t=202140

OK Internet tuff guy :chucks calm down please dont hurt me :lmao :lmao

Show me one thread in the 07/08 sub forum that has a link to the 05/06 clutch mod as a result of searching "slipper adjustment" in this sub forum.

Here let me help you

http://www.gixxer.com/forums/search.php?searchid=3491870

And you say Im the fuck face and moron

Stop being a lil bitch did it really hurt you to help the guy out any way? If you want to help some one then do it but why be a cock to them while doing it.

OK Internet tuff guy :chucks calm down please dont hurt me :lmao :lmao

Show me one thread in the 07/08 sub forum that has a link to the 05/06 clutch mod as a result of searching "slipper adjustment" in this sub forum.

Here let me help you

http://www.gixxer.com/forums/search.php?searchid=3491870

And you say Im the fuck face and moron

Stop being a lil bitch did it really hurt you to help the guy out any way? If you want to help some one then do it but why be a cock to them while doing it.

Yup, you certainly are the internet tough guy eh?

Here ya go dummy......

http://www.gixxer.com/forums/search.php?searchid=3492200

Have a look at the 7th one... doesn't that answer the question? Yup, I do believe it does? You come in here blabbin on, ohhhh, ass hat, ohhhh, how is he supposed to find that, blah, blah, blah, Who the fuck cares what you think? Hmmmmmmmm? Small Dick Syndrome? Not my job to teach someone HOW to use the search button, now is it?
Did I help the guy? YES, I answered the guys question, and took a jovial dig at him... notice the LOL at the end of my post? NO? Read it again...... What did you contribute? Nothing, you didn't help the guy at all.....
Have a Nice Day GIX1000...... have a nice day.

I did search....must have not used the magic word.

Thanks guys.


Hope you got it sorted out........

Both of you need to calm down before I start kicking ass and taking names. :cursing :D

We're gonna play with it sometime soon, I hope. Looking forward to it, hope I can get it to the point where I can ride like I want to again.

Both of you need to calm down before I start kicking ass and taking names. :cursing :D

We're gonna play with it sometime soon, I hope. Looking forward to it, hope I can get it to the point where I can ride like I want to again.



LOL :chucks :chucks:bitchslap


Its all good his post speaks for themselves :banghead

Get it adjusted to your liking and go have some fun on that thing.

Both of you need to calm down before I start kicking ass and taking names. :cursing :D

We're gonna play with it sometime soon, I hope. Looking forward to it, hope I can get it to the point where I can ride like I want to again.

Try running the pins at 2 to 2 1/4 turns out. When you screw the pins in after loosening the lock nuts, just screw them in until you feel resistance, then back them out 2 to 2 1/4 turns. Turn them in to slip more, turn them out to slip less

LOL :chucks :chucks:bitchslap


Its all good his post speaks for themselves :banghead

Get it adjusted to your liking and go have some fun on that thing.

They do indeed speak for themselves now down they????
:homo

Try running the pins at 2 to 2 1/4 turns out. When you screw the pins in after loosening the lock nuts, just screw them in until you feel resistance, then back them out 2 to 2 1/4 turns. Turn them in to slip more, turn them out to slip less



They do indeed speak for themselves now down they????
:homo

Damn you quoted everything else I said why couldn't you quote me when I told him how to adjust them?

i just installed a new clutch last night, i did everything on this page, adjusted those three studs, let the clutch soak, and it doesn't engage the clutch when i pull the lever, and also the lever is ridiculously hard to pull, any ideas? also is there a diy vid or pics for this job?

the new kit i just put in was new plates, frictions plates, and springs, the spring are thicker then oem. torque the springs down to 8foot lbs, and turned the 3 studs until resistance and backed off 2 turns. the only thing i can think of is that throwout bearing, is the a spec for adjustment? or is there somting else i possibly have to adjust?

Check to make sure you put the pressure plate on correctly. There is a tab on the plate that has to go into grove in the basket.