I ordered a set of those mirrors off of ebay with the built in led turn signals and I was wondering how hard they are to wire up?Im looking to do the same thing goes for the flush mount signals. Thanks in advance.

There are only two wires in the stock wire harness for the signals.

so you are wanting 2 sets of front turn signals on your bike? :scratch

if you get the ones that everyone sells on ebay use the stock mirror base for the srad. i drilled the stock base for the wire and fed the wire threw then down the bird cage and then you have it pretty much hidden. oh you will have to shave a bit of the round end of the mirror stalk to make it fit in the srad base. i found that with the universal bases that come on them have the mirrors sticking way up in the air.

Sorry I meant to say I'm gonna attempt to wire up the mirrors as well as the flush mount turn signals. I wasn't sure what I needed to splice into to make it all work since the bike didn't come with any front indicators at all so I'm not sure where it's located in the wiring harness.

pos to pos and neg to neg.... fairly straight forward. did you get r6 style flush mounts as they fit the srads too since it is easy to find them. your flashers will flash faster.