A properly crimped rivet link on your motorcycle’s chain is critical for safety. DID’s KM500 chain tool is built to help you cut most chains to the proper length then set the connecting link plates in place at the correct depth and then rivet each pin correctly.

Call TJ at 866.931.6644 ext 817 and he’ll send one of this tool to you fast. You can also email him, GIXXER at RIDERSDISCOUNT dot COM is the address, just be sure to put DID KM500 in the subject line.

Includes a handy carrying case and excellent instructions.
http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_6.jpg

http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_5.jpg

The tool in action, pressing a plate.
http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_4.jpg

Flaring a rivet.
http://www.ridersdiscount.com/forum/did/did_cutting_and_riveting_tool_km500_7.jpg