Well, Now that it's winter here in canada.. it's sleepy time for the bike.. Well I decided to strip her RIGHT down to the motor and frame.. I'm looking for a theme.. I use pink,white and black for colours.. Anyone got any ideas.. on what to powder coat what? Or what paint.. or what designs.. Also looking for some ideas on motor maintance* It's a stunt bike* that Would be good to do well winter is here...

Thanks for all the input in advance... and P.S i'm jealous of all you guys that ride year round!

Using those colors, I'd probably paint the frame most flashy color (pink), because it's a stuntbike :)

Or if you want the bike to be almost only pink:

http://image.superstreetbike.com/f/10994792+w750+st0/0601_sbkp_01_z+2005_motorcycle_mayhem+pink_bike.jp g

Or white with pink:
http://image.automotive.com/f/images/8816024+pheader/0704_sbkp_07_z+industry_buzz+kane_friesen.jpg

Heres some work in progress.

Can you tell where i've cleaned :dunno

http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs229.snc1/7627_161908856611_501556611_3213711_7456545_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs229.snc1/7627_161908871611_501556611_3213712_7527765_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs229.snc1/7627_161908881611_501556611_3213713_5761509_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_161908891611_501556611_3213714_6188011_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_161908901611_501556611_3213715_2584060_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_161908911611_501556611_3213716_5881388_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_161908931611_501556611_3213717_526006_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc1/hs229.snc1/7627_161908936611_501556611_3213718_2332190_n.jpg



Let me know what you think:punk

Well,

So part i plan on either painting the frame.. pink or white.. can't fgure it out.. Any suggestions..


I'm also getting the following parts powdercoated pink so far.

-Compelete exhaust pipe*not the slip on*
-Front fairing bracket
-Wheel Axel bolts
-Sub frame

Powercoat black
- Rear sets
-Heel guards

powercoat white

Getting the rims re done
crash cage re done.


Any ideas i'm open too!


So more updates.. working on getting all the scratchs out of the frame..took me 5 hours to get all the chips out of the forks.. Stupied rock chips! :banghead

http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_162638676611_501556611_3218351_7841871_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_162638681611_501556611_3218352_7104409_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_162638686611_501556611_3218353_8166403_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs229.snc1/7627_162638716611_501556611_3218354_176989_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs229.snc1/7627_162638726611_501556611_3218355_5220157_n.jpg

Here are some updates.. I get really bord with days off :sleep

Looking to get this project done quick and right.. i got another bike project i wanna work on.. And this bike needs to be ready for january 1st.

Tell me what you think of the progress.. Standed the frame for painting tonight.. cleaned more up.. and got my pink powder coat pile together.


http://photos-b.ak.fbcdn.net/hphotos-ak-snc1/hs275.snc1/10225_163407301611_501556611_3224115_1892144_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc1/hs275.snc1/10225_163407306611_501556611_3224116_8233928_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc1/hs275.snc1/10225_163407311611_501556611_3224117_189973_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10225_163407286611_501556611_3224113_3862701_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10225_163407281611_501556611_3224112_3287555_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10225_163407271611_501556611_3224111_716089_n.jpg

i really want to follow this ,but pink ?

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs209.snc1/7627_161908911611_501556611_3213716_5881388_n.jpg


why a hole in the rear seat foam?

Spot for your foot for wheelies. Its a stunt bike.

i really want to follow this ,but pink ?


It's different! gets looks and isn't your average bike.. which is what i'm looking for something AGAINST the average flow.



600k2- It's a hole in the seat for one footed ss's or easy flamingos..:punk

Spot for your foot for wheelies. Its a stunt bike.

ok, thanks guys. i thought stunna's added a metal spoiler thingy to the rear above the brake light for their foot. never saw them cut a seat before

like this:
http://blog.crazymoto.net/wp-content/uploads/2007/07/zoltan-stunt-bike-show-2007-2.jpg

600k2- That is a 12 oclock bar.. I have one too.. if you look at my sub-frame you'll see it attached

http://blog.crazymoto.net/wp-content/uploads/2007/07/zoltan-stunt-bike-show-2007-2.jpg

Wow, that's a small rear sprocket...

Well update.. my pile of goodies are getting powdercoated.. So it should be nice when i get them back :)

when are you dropping the engine?

Don't if i am or not.. I'm trying at avoid that as much as i can for a little till i get the proper lifting equipment for the bike

Hey everyone.. have done any work on the bike in the last coupe of days..

So i went ahead today and painted the front forks...

I used a Metallic black and I sprayed 4 layers of clear coat on.. Can't wait to get my new spray gun.. it will lay a lot better..

let me know what you think..

http://photos-c.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10225_165313401611_501556611_3235923_1866315_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10225_165313376611_501556611_3235920_445232_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10225_165313381611_501556611_3235921_5362791_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc1/hs255.snc1/10225_165313391611_501556611_3235922_8321839_n.jpg

This picture journal is AWESOME! Please keep it up. I would love to do something similar to my 03-750 but I am not as confident as some of your guys are at taking apart a whole machine like this. Seeing you do it gives me some confidence that I can handle the job myself without having to pay someone else $1000.

BTW...I want to paint my frame black. I know you can powder coat, but I the one thing I don't wanna do is take the engine out. I know you can use the truck bedliner spray like two people on this forum did, but I don't really want the frame to be rough like sandpaper (sometimes I wear shorts here in hot Miami). So here's my question...What about taping off the entire engine and parts, sanding the frame just short of a polish, and using high temperature automotive spray paint? http://www.hightempenginepaint.com/

This picture journal is AWESOME! Please keep it up. I would love to do something similar to my 03-750 but I am not as confident as some of your guys are at taking apart a whole machine like this. Seeing you do it gives me some confidence that I can handle the job myself without having to pay someone else $1000.

BTW...I want to paint my frame black. I know you can powder coat, but I the one thing I don't wanna do is take the engine out. I know you can use the truck bedliner spray like two people on this forum did, but I don't really want the frame to be rough like sandpaper (sometimes I wear shorts here in hot Miami). So here's my question...What about taping off the entire engine and parts, sanding the frame just short of a polish, and using high temperature automotive spray paint? http://www.hightempenginepaint.com/

I just did what you are talking about this past weekend. Still alot of work, but doable. I sanded and prepped the frame. Primed it and did the whole thing black. After I was done someone told me that using vinegar on the bare aluminum is one of the only ways for the paint to stick to the aluminum. It makes the metal become porus. When you paint it, the paint seaps in and then the pores close.

This picture journal is AWESOME! Please keep it up. I would love to do something similar to my 03-750 but I am not as confident as some of your guys are at taking apart a whole machine like this. Seeing you do it gives me some confidence that I can handle the job myself without having to pay someone else $1000.

BTW...I want to paint my frame black. I know you can powder coat, but I the one thing I don't wanna do is take the engine out. I know you can use the truck bedliner spray like two people on this forum did, but I don't really want the frame to be rough like sandpaper (sometimes I wear shorts here in hot Miami). So here's my question...What about taping off the entire engine and parts, sanding the frame just short of a polish, and using high temperature automotive spray paint? http://www.hightempenginepaint.com/

My theory.. They make parts and haynes manuals everyday!.. and someone is on here every minute.. if you get stuck!.. just get your hands dirty!:punk

when are you dropping the engine?

Well heres how she sits now:crying:crying


http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_171102551611_501556611_3290065_8002978_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_171102546611_501556611_3290064_7777767_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs018.snc3/12543_171102531611_501556611_3290063_2872567_n.jpg

u got that biatch stripped down:chucks

Awesome progress! Keep us updated :)

You got a car on the go as well? Jeez man, finish one job before you start another! :wink:

Got your hands full now I guess - good luck getting it all back together when the powder's done - looking forward to the pics!

Was cleanning up the motor today.. got this far. still more to go!

I'm exicited to get my parts back from the shop next week!!!!

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_172575241611_501556611_3311387_2623111_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs018.snc3/12543_172575781611_501556611_3311388_6423918_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_172576106611_501556611_3311390_6639459_n.jpg

Liking this thread. Good job gixxercan

More updates for cleanning.. is any subscribed to the thread?

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs018.snc3/12543_173404771611_501556611_3318453_2485563_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_173404776611_501556611_3318454_7686031_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_173404781611_501556611_3318455_5202170_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_173404786611_501556611_3318456_1124150_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs038.snc3/12543_173404791611_501556611_3318457_6817152_n.jpg

im subscribed

any one got any ideas on how to clean the motor better?

You got that bike stripped down! It should be like new when your done. Good job so far.

Well.. Since I'm doing a pink black and white theme. my girlfirned got me a GSX-R symbol made..


It will be One mean/tough looking stunter:lmao:lmao

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs040.snc3/12759_174700401611_501556611_3328571_5227973_n.jpg

Yeah, butch as!

What are you using on the motor now? I'd guess a mild solvent/abrasive like AutoSol or something to get rid of the accumulated crud, and have some degreaser handy as well. There's no substitute for a toothbrush, toilet brush, soft wire brush and lots of elbow grease.

Yeah, butch as!

What are you using on the motor now? I'd guess a mild solvent/abrasive like AutoSol or something to get rid of the accumulated crud, and have some degreaser handy as well. There's no substitute for a toothbrush, toilet brush, soft wire brush and lots of elbow grease.

I'm using spray nine and mastercraft degreaser.. I got a brisle brush,wire,wool.

Then just keep scrubbin'!

go ahead and blast your motor with some high temp gloss black while its apart.

+1!

UPDATE:

Got my frame back from the powder coat shop.. get the rest of my parts next week!

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs066.snc3/13365_179797651611_501556611_3370941_4320122_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs066.snc3/13365_179797656611_501556611_3370942_5103213_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs066.snc3/13365_179797661611_501556611_3370943_6282070_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs046.snc3/13365_179797666611_501556611_3370944_2817795_n.jpg


PINK FTW:punk:punk

Raspberry yogurt.

What did powder coating cost you?
I'm thinking about tearing mine down and putting fast black on the frame, subframe, swing arm, and fork bottoms.

well, I got LOTS of powder coating done and I paid 50$ CND. for everything...

i love threads like this. this thing is going to look sick when it is done

lots of ewwww

lots of ewwww

Your just mad because your wifey probably saw this thread and is threatening not to sleep with you if you don't do what I'm doing:lmao:lmao

Got more parts back from the shop*the last of the pink*

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_182666751611_501556611_3393248_8303600_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_182666761611_501556611_3393249_5072085_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_182666776611_501556611_3393250_8075636_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_182666761611_501556611_3393249_5072085_n.jpg

Well started the body work this week.. heres what 21 hours of sanding looks like.. I started at 800 grit and now i'm up to 3200.. frame should be back from getting x-rayed and some other tests run on it get some new welds(that suzuki sucked balls at welding)

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_185564386611_501556611_3409658_6719565_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_185564391611_501556611_3409659_4740343_n.jpg

The powdercoat on those headers is not gonna last due to extreme heat. I had my midpipe to my yosh trc done for my k8 and it lasted about 2 weeks of agressive riding :dunno

Hope you got your headers ceramic coated, jet hot coated or something to that effect as like redlinegsxr said its jst going to discolor and peal off.

Think shes gonna look sick when you get her back together!

it was powder coated and then heat temped to 1200C... Our bikes don't run that hot ;)

it was powder coated and then heat temped to 1200C... Our bikes don't run that hot ;)

lol Nope they dont....

Should stay lookin good then.:punk

Well more sanding updates.. 38 hours later and this is what i'm at.

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_189204426611_501556611_3440270_1111567_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_189204431611_501556611_3440271_3436252_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_189204766611_501556611_3440273_2442104_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_189204776611_501556611_3440274_2675838_n.jpg

:punk

That is going to look so porn.

Your just mad because your wifey probably saw this thread and is threatening not to sleep with you if you don't do what I'm doing:lmao:lmao

umm yea .ok .My wife would have the sense to stop me if i was doing what your doing



Well started the body work this week.. heres what 21 hours of sanding looks like.. I started at 800 grit and now i'm up to 3200.. ]

if it took 38 hours to sand one bikes panels ,you've wasted about 35 hours .My 7 year old could sand a whole bike in 4 hours and his hands are the size of golfballs.I cant imagine what you have been doing and then i realize you STARTED with 800 grit ,,are you trying to be the first person to succesfully polish plastic to a chrome like finish ???

its none of my buisness but why the hell are you using 800 to start and up to 3200 ? 800 is used on base for before clear coat ,and even thats pretty high . 3200 would only be used for wetsanding before a high polish ,and even thats too high,if you cant polish paint with 2000 you need more practice .

NOTHING you spray on 3200 will stick .I'm suprised you havent started a fire yet with trying to sand with 3200.You should have that bodywork prepped to around 320 before a sealer .The amount of break throughs and mutiple levels of paint etc will be nothing but problems without a sealer /primer ,and even then you've created a shit storm of a mess .Even the primer /sealer wont stick to 3200 and it would almost stick to glass ........which is what you have rigth now

with a 3200 grit sand the paint will flake off in a stiff breeze,or if someone has a conversation too close to the bike.

do yourself a favour and stop what your doing

Well when my boss's brother is north American BEST body guy.. and he just did 2 barracudas for the owner of some trucking corp in the states.And made 23 million a car.. I'll believe him over you.... Right a average Joe.

Your looking for MICRO fine sand scratches to adhere the paint. And when you have about half a dozen different devilbiss cvi hvlp guns to choose from. But when you learn to paint and show me some of your work.. I'll believe you..

It's half ass jackass's like you that are like OMG I"LL RUSH THIS AND GET DONE AND IT WILL LOOK AWSOME.. and you wonder why you have to re paint it in 2-3 years.. because you didn't do it right.. maybe if you took it to a "A" grade level instead of your civi "c" grade level you would be more happy with your bike.. because if you were "a" grade. your bike would be ran till it hit operating temperatures and then Shut down rebuilt from SCRATCH make your own pistons.. make your own block*and bury it in sand for 10 years* So before you got off shooting your mouth about Shit that you obviously DON"T know about. Save yourself some typing time and go live in your 300k$ house and make your 20$ a hour.

So you get it to the point where you only allow the sand lines to flow the SAME WAY you plan on spraying I also have to work in a 40% humidity room to keep the plastics at proper flex. with a wet floor to keep my dust down. Also have to wear NON powder latex gloves for the sanding, and seems like the first coat of primer on the one side of the front fairing held up nice..*if you even looked at the pictures*

Oh and just so you know.. all the reeds dairy or milky way trucks you see out there.. He painted :chucks


AND FINALLY.. IF YOU DON"T LKE THE THREAD.. PISS OFF..

edit ***why even bother

edit ***why even bother

Yet those don't impress me :lmao

Enjoy wasting your time.. I'd like it if the mods would delete his posts so it stops clogging up my posts...

If you have to paint more then 2 bikes ever 5 years.. to make a living. YOUR DOING IT WRONG!.

2 barracudas... 2 years EACH.. 23 million EACH... 1 bike 3 weeks.. 900 bucks.:lmao:lmao:lmao

YOUR A JOKE.. Face it.. Your arguing with a 20 year old kid and your what 34.. and have a life.. obviously your life must suck THAT FUCKING MUCH if you need to argue with a 20 year old.. Do you push your kid down to make yourself feel strong too.. What a loser.. Like seriously man.. Go make some real money.. CHANGE PROFESSIONS.. if you have painted 2000 bikes and your still working.. FUCK you suck at your job.. even if you charged 1000 a bike

2000x1000=2,000,000 In all your years.. Well in 2 cars done boss's brother made=46 million in 5 years... 46 million divide by 5*for one years work* is 920,000$ so in 2 years he made more then you did your WHOLE time painting.. And he has been painting for 10 years.. after he used to test drive for porsche

Please continue.. We all need a good laugh up here in Canada.

Play nice.

This bike is not my style at all, but it sounds like you'll like it.

Yet those don't impress me :lmao

Enjoy wasting your time.. I'd like it if the mods would delete his posts so it stops clogging up my posts...

If you have to paint more then 2 bikes ever 5 years.. to make a living. YOUR DOING IT WRONG!.

2 barracudas... 2 years EACH.. 23 million EACH... 1 bike 3 weeks.. 900 bucks.:lmao:lmao:lmao

YOUR A JOKE.. Face it.. Your arguing with a 20 year old kid and your what 34.. and have a life.. obviously your life must suck THAT FUCKING MUCH if you need to argue with a 20 year old.. Do you push your kid down to make yourself feel strong too.. What a loser.. Like seriously man.. Go make some real money.. CHANGE PROFESSIONS.. if you have painted 2000 bikes and your still working.. FUCK you suck at your job.. even if you charged 1000 a bike

2000x1000=2,000,000 In all your years.. Well in 2 cars done boss's brother made=46 million in 5 years... 46 million divide by 5*for one years work* is 920,000$ so in 2 years he made more then you did your WHOLE time painting.. And he has been painting for 10 years.. after he used to test drive for porsche

Please continue.. We all need a good laugh up here in Canada.

without going into a long rant about how stupid you are with your made up 25million dollar cuda story ,ill leave you alone because you are obviously a total idiot with nothing but a pink bike and terrible skills .

My dad lives in regina let me know where you work so he can ask your bosses brother what he did with his millions .:banghead:banghead

cya

without going into a long rant about how stupid you are with your made up 25million dollar cuda story ,ill leave you alone because you are obviously a total idiot with nothing but a pink bike and terrible skills .

My dad lives in regina let me know where you work so he can ask your bosses brother what he did with his millions .:banghead:banghead

cya



if your dads anyone speical out here or if your anyone.. You'll know who i'm talking about in calgary area then!

if your dads anyone speical out here or if your anyone.. You'll know who i'm talking about in calgary area then!

pm sent ,i won't clog up your thread .

pm sent ,i won't clog up your thread .

Check your inbox and thanks clogging a thread is like having a clogged asshole*not that i'd know:shifty haha jk*.. it's annoying.

Doing some plastic welding with a bit of help from BCC.

Before
http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_190137416611_501556611_3447052_60684_n.jpg

After

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_190137421611_501556611_3447053_553356_n.jpg

Gosh!!...I hope we are all still in the same tribe!!! :cheers

Doing some plastic welding with a bit of help from BCC.

Before
http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_190137416611_501556611_3447052_60684_n.jpg

After

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_190137421611_501556611_3447053_553356_n.jpg

want to keep in mind to try and get most of the paint away from the weld so the paint does not contaminate it ,but for a spot that small it should be fine .Put another little bit of weld in that crack area on the top side so that you wont need much filler and it will still remain flexible

Always test the weld past a normal failure point before paint ,or the day you go to mount it all painted up ,or when you go to wetsand and polish it wants to crack and make you want to kill someone.:crying:biggrin

keep it up tho,looking good

want to keep in mind to try and get most of the paint away from the weld so the paint does not contaminate it ,but for a spot that small it should be fine .Put another little bit of weld in that crack area on the top side so that you wont need much filler and it will still remain flexible

Always test the weld past a normal failure point before paint ,or the day you go to mount it all painted up ,or when you go to wetsand and polish it wants to crack and make you want to kill someone.:crying:biggrin

keep it up tho,looking good

Looks good, I had to repair a few cracks in my tail fairing. It came out fairly well.

Picked up some fairings for 50$.. plan on using them over the stock ones.. Except i'm using a stock tail. ENJOY

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_191263146611_501556611_3456410_4416211_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_191263156611_501556611_3456411_8368710_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_191263171611_501556611_3456413_4032741_n.jpg

wanna sell your upper then???

my stock upper fairing? PM me a offer

Yeah the stock upper....
PM'ed

good stuff gixxercan! I'm going to be doing this myself I'm just waiting on a few more parts to come in. I was initially going to trash my bike learning on it then switch out to a 636, but its gonna be at least a season or two before I get decent so I want to make the bike look fresh.

SUBSCRIBED

UPDATED LADIES AND GENTLEMENT AND THOSE WHO USE FLUFFY SHOWER SCRUBBERS... NO NAMES:lmao*

Trying to clean it up as much as i can :)


http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_199895101611_501556611_3518773_2786285_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_199895106611_501556611_3518774_4721812_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_199895111611_501556611_3518775_8103744_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_199895121611_501556611_3518776_375710_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_199895126611_501556611_3518777_6221750_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_199895131611_501556611_3518778_4183614_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_199895141611_501556611_3518780_4805960_n.jpg

I like it alot. What color are the fairings going to be again?

same as the tank.. metallic black.. I put the forks the same color.. so you'll get a color lay idea looking at the pink and black there.

your going this far, id spend the money to have the tank and plastics professionally sprayed. looks like rattle can on that tank from here, unless it hasnt been sprayed yet. frame looks good though, even for pink!

Hey -- looks like the work is coming along nicely.
Just running through your photos-- and althought they are about a month old, i notice that the last shots of the engine show uncovered throttle bods.
you may learn from my past bonehead experience, and cover them with 4 sponges or clean rags. I only made the mistake once, but it was a doozy!

Hey -- looks like the work is coming along nicely.
Just running through your photos-- and althought they are about a month old, i notice that the last shots of the engine show uncovered throttle bods.
you may learn from my past bonehead experience, and cover them with 4 sponges or clean rags. I only made the mistake once, but it was a doozy!

They have rags in the intake and exhausts..PLus it's a heated garage that stays at 23C. And theres plastic of it aswell :)

your going this far, id spend the money to have the tank and plastics professionally sprayed. looks like rattle can on that tank from here, unless it hasnt been sprayed yet. frame looks good though, even for pink!

They are rattle caned but I haven't sprayed them yet. I'm planning to have a nice out come! followin some really good directions from a couple of guys.. plus.. fiberglass lays way nicer then plastic i think!

Update... Custom plastic welded in some rear blinkers..


http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_202817236611_501556611_3528779_1933851_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_202817196611_501556611_3528774_4122519_n.jpg

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_202817201611_501556611_3528775_7045086_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_202817211611_501556611_3528776_7645383_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_202817226611_501556611_3528777_7526912_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_202817231611_501556611_3528778_2104436_n.jpg

Well i got some diamond plate cut today for the tail section to re-enforce it aswell as some new SS lines for the brakes!

Got the tail section painted and Front tire hugger...next the main body racing fairings :)

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_211607316611_501556611_3563664_7984701_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_211607336611_501556611_3563665_529850_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_211610631611_501556611_3563668_8282247_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs075.snc3/14240_211610651611_501556611_3563669_3789067_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs055.snc3/14240_211610661611_501556611_3563670_7128008_n.jpg

Well i got a week off.. So I worked on fitting my front fairings before paint.. So this is how the upper sits! Gonna work on the bottom tomorrow.. all the primer is going metallic black. And I got a Angel Eye projection on order little 3" head light :twisted: Should be a nice stunter When I'm done I think.

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs160.snc3/18750_217148721611_501556611_3583716_4050693_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs160.snc3/18750_217151211611_501556611_3583729_7884352_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs140.snc3/18750_217151221611_501556611_3583730_472279_n.jpg
http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs140.snc3/18750_217153421611_501556611_3583739_8322269_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs160.snc3/18750_217153446611_501556611_3583740_6286588_n.jpg

yea but its still pink.lol

progressing nicely! can't wait to see the finished product

yea but its still pink.lol

your point being...........?? you use a fluffy shower scrubber :chucks

Well I got a little suprize.. and I got my swing arm in..so I wanted to test fit her

heres my test fit.

http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs234.snc3/22142_217496061611_501556611_3585915_2937390_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs234.snc3/22142_217496066611_501556611_3585916_2452862_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs234.snc3/22142_217496071611_501556611_3585917_5428310_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_217496081611_501556611_3585918_4914008_n.jpg

Black swingarm? Why not in pink?

... and you are getting the wheels painted too, yeah?

Black swingarm? Why not in pink?

I think it works on the bike.

Black - Tail
Pink - Sub
Black - Swing
Pink -Torque Arm/ Kickstand (depending on which side you look at the bike from)

Front shock sleeves are black.. So swing arm gotta be black.. And I don't want TOO much exposed pink.. i'm gonna try to kill the pink with the white and black...

looking for ideas where to put the headlight.. as I was talking with RCC dead center is old and killed.. gonna off center it :)

.. And I don't want TOO much exposed pink.. i'm gonna try to kill the pink...

Bit late for that!!! :lol:

Well I wanted to test fit everything.. So here she is.. for the last time. . i'm taking her apart tommorow and not that all holes a drilled a count of bolts needed are done..I willl start to finish the motor and then start putting her together!

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_218772101611_501556611_3591085_1065251_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_218772116611_501556611_3591086_1436890_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_218772126611_501556611_3591087_6459857_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs234.snc3/22142_218772131611_501556611_3591088_133702_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs234.snc3/22142_218772136611_501556611_3591089_4687846_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_218772146611_501556611_3591090_7290527_n.jpg

I love the project, but I fear I'm going to hate the end result.

Not my bike though, so as long as you like it...

hope everything comes out awesome! good work! :)

Got my 3" projection head light today.. PUMPED to make a mold and put her in..

Well put the projection light in..

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_222676626611_501556611_3605169_3343259_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_222676666611_501556611_3605176_7070717_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_222676691611_501556611_3605177_6364567_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs234.snc3/22142_222676701611_501556611_3605178_1116745_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_222676731611_501556611_3605181_2877101_n.jpg

Well peeled the motor open to check clearance.. MOTOR IS TIGHT AS HELL!..

And clean and nice! 21,000km on it..


http://photos-f.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_224461166611_501556611_3616274_1252252_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_224461171611_501556611_3616275_3268836_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_224461176611_501556611_3616276_8276470_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_224461181611_501556611_3616277_5228125_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_224461201611_501556611_3616278_3092717_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_224461206611_501556611_3616279_2655889_n.jpg

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_224461211611_501556611_3616280_1115225_n.jpg

is it me or is your projector upside down?
;)

is it me or is your projector upside down?
;)

Yes well when your test fitting it doesn't matter.. but thanks for the observation Sherlock Holmes!:chucks

is it me or is your projector upside down?
;)

nvm, op spoke up

Some more headlight work.. ALMOST THERE :)

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_226994971611_501556611_3629868_2338262_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_226994976611_501556611_3629869_1579212_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_226994981611_501556611_3629870_5409352_n.jpg

nice work....subscribing

yeah dude.. i wish i had enough skill to do a headlight like that...

nice. What is that projector out of and howmuch did it run you?

Well put the projection light in..

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs214.snc3/22142_222676626611_501556611_3605169_3343259_n.jpg


Reminds me of The Terminator...

http://www.the213.net/photos/2008/teyearm.jpg

Reminds me of The Terminator...

http://www.the213.net/photos/2008/teyearm.jpg

+1 haha

I knew it looked familiar!

Great job on the head light!

nice. What is that projector out of and howmuch did it run you?

it's just a Local auto store Projection fog light.. with the bulb changed to 12k

Was it pretty cheap? It looks like it has a pretty good cutoff (albeit upside down :p)

DAM UR PROJECT IS GREAT, i wish i had all that much skills to pull something off like that.

BUT see i wont coz here is Australia we dont have cold ass winters where our bikes are garged for hibernation LOL..
Cos i wont be able to live wif ma bike off the roads for so long..:punk

Was it pretty cheap? It looks like it has a pretty good cutoff (albeit upside down :p)


about 80$ cnd for a pair.. Also It's has bad lighting in that picture.. the light is pretty far deep in the tube*about 4" away from flush*.

Lookin good bro! Lets see a pic of the light from the riders side.

Yes well when your test fitting it doesn't matter.. but thanks for the observation Sherlock Holmes!:chucks

:lmao:lmao:lmao...sherlock holmes :punk :lmao

Some more updates.. And A space saving idea!

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_231810651611_501556611_3652367_4274821_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_231810656611_501556611_3652368_6310522_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_231810661611_501556611_3652369_4027344_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_231810671611_501556611_3652370_7118370_n.jpg

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_231810676611_501556611_3652371_7155570_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_231810686611_501556611_3652372_4245471_n.jpg

Well I Found a little set back today boys.. My rear shock Shit the bed..

gsxr 1000 shock will be put in place instead :)

At least it's an easy fix (relatively!)

Well I Found a little set back today boys.. My rear shock Shit the bed..

gsxr 1000 shock will be put in place instead :)

you sure are getting a lot of credit for your headlight .....hmmmm i find that quite interesting .:shifty





jk





:lmao

you sure are getting a lot of credit for your headlight .....hmmmm i find that quite interesting .:shifty





jk





:lmao

Don't you have a fluffy scrubber to go use :shifty

haha just playing.. Yes yes you helped me find the spot and gave me direction.:flipoff

need some pics of it from riders side. how its mounted etc etc...

need some pics of it from riders side. how its mounted etc etc...


Trade secert ;).. No I'll post up monday when I'm back at home.

Don't you have a fluffy scrubber to go use :shifty

haha just playing.. Yes yes you helped me find the spot and gave me direction.:flipoff

dont give me any credit when it comes to your vagina bike ,lol thats all you man .:lmao

dont give me any credit when it comes to your vagina bike ,lol thats all you man .:lmao


Your just mad because you can't wheelie.. I think you have a vagina!:lmao

I'm looking for some new rotors for the bike.. anyone got any suggestions?

I have a set. Pm me if interested

http://www.motomummy.com/store/product.php?productid=17192&cat=444&page=1


http://i468.photobucket.com/albums/rr47/flyin-low/IMG_0032.jpg

http://i468.photobucket.com/albums/rr47/flyin-low/008.jpg

Well since I"m about doing my own work.. I'm redoing my oil seals and dust cover on the front forks..

Now I've got them apart.. and I'm getting new seals and dust cover tommorow.. Now i was reading the service manual and it only has the method of putting new oil in is to take the spring apart.. I'm wondering if theres another way.. i didn't take spring assemble apart at all.. just took it out of the tube..

Anyways to put oil in and make her good to go?

No you dont have to take the spring apart jst slide it out clean it up with WD-40 clean the tube put the spring back in and fill it up.

then whats all this take on taking the spring apart.. and charging something and what not.. I'm ONLY changing my Oil seal*not that they needed it very much but they started to leak a little* and my dustcover*one was ripped a bit* and the oil looked like jeuss himself made it.. Looked like grey tar. no thickness or anything to is.. it was no different then water..

Well I did some paint work and heres the out come.. NO it's not show bike material but yes it's good enough for stunting I think!

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_256047071611_501556611_3767646_6507749_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_256047096611_501556611_3767649_6379377_n.jpg

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_256047111611_501556611_3767651_1715027_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_256047116611_501556611_3767652_4998148_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs176.snc3/20342_256047121611_501556611_3767653_240849_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs196.snc3/20342_256047161611_501556611_3767657_5318000_n.jpg


:chucks

Alright.. I got new dust and oil seals for the front forks and I went with 5WT fork oil.. Now I"m thinking I just pure in the reccommend amount.. Compression the shock a couple of times so theres no air.. then check the oil level again and add it needed then just put it together is this correct*I just took the fork apart and took the dust and oil seal off. everything else is together, The inner spring mech is all together not touched or taken apart.*

haha your bike looks like mine(02 600) i'll have to take some pics wile your in the tare down a good suggestion would be to go to inverted forks and might want to modify your 12 bar the sub frame tends to break at the bolts

i see my internet is being gay again guess i missed the last 6 pages of that thread before my last post...... like the paint job.. i painted my fairring black and my frame is going to the paint shop this week for some hot barbie pink

When did you decided to do that?

After seeing my build or?

i just saw this tread yesterday.... i decided to paint the frame pink when i bought the bike 2 months ago but i dont have a heated shop so it's been a slow process.....i was thinkin about just painting the wheels crash cage 12 stator cover and the sub frame cash pink because i thought the frame would be too much but i have to admit after seeing yours all done it looks too good not to

where in canada are you

Ontario

no shit i'm near windor

are you sure you two aren't the same person?

Yes.. note how he is getting his rims pink and I'm getting my cage and rims WHITE

Okay.. so BACK to my question.. i took my front forks apart to change out my oil seals as the left one had som blow by.. Now i took the oil out aswell.. can I just measure out the oil.. dump her in and compress the fork with the oil seal off to get all the air out and then when theres no more bubbles(top up the oil if needed) and then slam the oil seal in and the dust cover and be done or what should I do.. I'll take pictures tonight on how my forks sit

there is a set amount you need to put in

Yes I know that.. BUt i'm trying to find if i can do it that way..

Also, will 06-08 rear rotors fit a 03?

Well Got my subframe cage made today :)

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs240.snc3/22742_278496086611_501556611_3848443_7615266_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs240.snc3/22742_278496096611_501556611_3848444_4690235_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs220.snc3/22742_278496111611_501556611_3848445_6221151_n.jpg

nice cage but you forgot the exhaust mounthing bracket

Not putting one.. getting a really short one.

just read this thread from the start..........can't wait to see the finished product.
not the colours i'd choose but it's your bike and seems like you know what you want and that's what matters.
keep it up and good luck :cheers

subcribed

Thanks Armi,

Anyone know if A 1000 rad will mount up and if it will cool the bike some more.. or just slam another fan in there and call it a day?

I'm looking to run the bike a bit cooler*averages 76-79C when Riding, 91-98C when idling for long time*

Is there a oil cooler I can put it with little problems to appear or no?

Thanks Armi,

Anyone know if A 1000 rad will mount up and if it will cool the bike some more.. or just slam another fan in there and call it a day?

I'm looking to run the bike a bit cooler*averages 76-79C when Riding, 91-98C when idling for long time*

Is there a oil cooler I can put it with little problems to appear or no?

Could you just run a switch to your fan so you can run it constantly? I know a couple of guys over on SL have done it.

Could you just run a switch to your fan so you can run it constantly? I know a couple of guys over on SL have done it.

+1 here's the tutorial if you're interested;

http://www.gixxer.com/forums/showthread.php?t=199502&highlight=fan+switch+over+ride

Already done. and got good results but i'm wondering on running it a couple degrees cooler as it sometimes gets 40C out here no problem

well i pucked up some rims and brand new rotors for 125$ :cheers

http://www.stuntlife.com/forums/attachment.php?attachmentid=236302&d=1265046018

http://www.stuntlife.com/forums/attachment.php?attachmentid=236303&d=1265046018

http://www.stuntlife.com/forums/attachment.php?attachmentid=236304&d=1265046018

Getting my cage and rims back this week.. new barrings and Champion white paint on them :punk

keep the pics coming mate :cheers

btw can't see the above ones posted

So the rotors I got are for a 1000cc 2003 gsxr.. And the guy told me there for a 600cc..

So thats upseting!.. Can I use them AT ALL? make them work some how?

Well the final test fit for everything before I get it all together! I'm obvsiouly still missing stuff in the picture.. like rotors.. crash cage, upper chop,left side controls and clutch and HB.:cheers

http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs463.snc3/25447_351981221611_501556611_4067215_111712_n.jpg

http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs463.snc3/25447_351981236611_501556611_4067216_3106162_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs443.snc3/25447_351981256611_501556611_4067218_2866050_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-ash1/hs463.ash1/25447_351981276611_501556611_4067219_4009362_n.jpg

http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs443.snc3/25447_351981286611_501556611_4067220_4703163_n.jpg


And a close up of the seats..

http://photos-c.ak.fbcdn.net/hphotos-ak-snc3/hs443.snc3/25447_349834416611_501556611_4061162_7952366_n.jpg

Aww your making me want to re do my stunt bike! I've got an f4i i think its SF but i think im gonna throw on some side fairings and get a round bar instead of my flat bar.

+Time to get out the sander and sand down the fairings. WHITE HERE I COME!

thanks.. well get on that clean it up!

its coming out WAAAAAAYYYY better than what I originally imagined, good work!! How long until you get it ride-able?

Another stupid month!!!.. but i did beat 3 cops and a crown lawyer in a criminal charge for stunting the other day.

ALMOST DONE :) :) :) Just waiting on HB,Brake lines and subcage, and new widescreen

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs484.snc3/26485_365042306611_501556611_4090900_6855988_n.jpg
http://photos-a.ak.fbcdn.net/hphotos-ak-snc3/hs504.snc3/26485_365042326611_501556611_4090902_3797458_n.jpg
http://photos-f.ak.fbcdn.net/hphotos-ak-ash1/hs484.ash1/26485_365042341611_501556611_4090904_7071837_n.jpg
http://photos-d.ak.fbcdn.net/hphotos-ak-snc3/hs504.snc3/26485_365042351611_501556611_4090905_729064_n.jpg
http://photos-b.ak.fbcdn.net/hphotos-ak-snc3/hs484.snc3/26485_365042356611_501556611_4090906_6867984_n.jpg
http://photos-h.ak.fbcdn.net/hphotos-ak-snc3/hs504.snc3/26485_365042366611_501556611_4090907_4271500_n.jpg
http://photos-g.ak.fbcdn.net/hphotos-ak-snc3/hs484.snc3/26485_365042376611_501556611_4090908_7220604_n.jpg

Here are some brake line pictures that I ran tonight.

http://photos-e.ak.fbcdn.net/hphotos-ak-snc3/hs419.snc3/25236_369997236611_501556611_4108615_584415_n.jpg

http://photos-g.ak.fbcdn.net/hphotos-ak-ash1/hs459.ash1/25236_369997251611_501556611_4108616_528756_n.jpg

http://photos-a.ak.fbcdn.net/hphotos-ak-ash1/hs459.ash1/25236_369997271611_501556611_4108617_7554283_n.jpg

Heres a video of the exhaust repacked and a new baffle pipe I made and shoved in it.

http://www.youtube.com/watch?v=lZ5ESjbmnGg

looks prety good, persionaly i think its a bit much on all the black, need some graphix or something to break it up

Another idea for a good color scheme is baby blue and hot pink, very flashy and the color's go good together, iv painted alot of kart chassis, also orange and blue look great together

Well i recently got sponsored by Motoskinz( if anyone is gonna order from them let me know I'll get you 10% discount) So i'll be wraping the bike!

where did you get the headlight from i want one to put in my srad project if anyone know hit me up pm and reply

You had a PM

Is this up and running yet? I've already broken another subframe meng, do work!

Nah.. snow JUST went away.. it's only 13C out right now. another 2 weeks and I'll be out!...

here are some updates ALMOST DONE!

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs471.snc3/25846_385617556611_501556611_4343810_3551743_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs471.ash1/25846_385617561611_501556611_4343811_8302148_n.jpg

http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs451.snc3/25846_385617566611_501556611_4343812_7260338_n.jpg

That bike is ugly as hell!!!!!

Each one to there own. . . But your the first to speak up and say it's ugly.. Thanks for the comment.. deep down you must like it or you wouldn't take the time out of your life to write about it :).

well heres the 98% complete.. just waiting on my RK subcage to get in.

http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs347.ash1/29528_386767876611_501556611_4372467_7733660_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs347.ash1/29528_386767881611_501556611_4372468_526475_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs358.snc3/29528_386767886611_501556611_4372469_4850050_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-snc3/hs358.snc3/29528_386767896611_501556611_4372470_1030237_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-ak-ash1/hs347.ash1/29528_386767901611_501556611_4372471_7485423_n.jpg

Pimpin aint easy meng!

wheres some stuntin pics

gonna get some pictures when my RK subcage comes in and It warms up a bit.. another week and a half and i'll be out and around.

thought you built a cage???

yah changed it up and got RK!

Take a pic looking straight at the front so I can check out the cut windscreen ?

Get some pazzo levers man, best investment ever! Oh, and i'm totally digging the pink chain!

Slap a white "R" on there and you'll be set.

pazzo= waste of money .. I'd Just got with a RSC clutch and brembo if i wanted.

whatev man. You definitely have a unique bike, good job!

That bike is ugly as hell!!!!!

Agreed 100%

Agreed 100%

Okay scotland, whatever lifts your skirt! :flipoff

any stunt pics?

any pics with the wrap on?

The hole in the rear seat, that's where you poop right?