anyone got a good map for a 03 600 with Two Bros bolt on?

I need one for a bolton akrapovic, 03 750 gix

thanks

why don't you just try dynojet.com... they have simple maps, if all you have is an exhaust

Any of the slip-on maps on dynojet.com is going to work.
You have a ---slipon--- nothing special. You could run with no map and your fine. Dont let anyone talk you into needing a custom map for your bike w/ a slip-on, you dont.

I picked up 5 rwhp with a custom map. Slip-on only. To me it was worth it.

Need a map for a 02 600 with K&N air filter and yosh slip-on TRS


Anyone???

needing a map for 06 600 m4 bolt on / k&n

woops, i meant an 03 600, he he better slow down with the typing.

If anyone has a map for a 99 750 with a hindle full system high mount with the airbox mod and K&N filter, please please let me know

I need a map for my 97 750.

Just kidding.

If you want a "custom" map, find one that runs and put it on the dyno as much as you can afford.

Only one big problem with using a dyno. There is none anywhere near here cept at a harley dealer, and he's never done this type of bike, so he's very unsure about trying it

vlud said:
Only one big problem with using a dyno. There is none anywhere near here cept at a harley dealer, and he's never done this type of bike, so he's very unsure about trying it



Call Barb at Roy's Repair (http://www.roysrepair.com/) in the twin cities.... the guy does great work. http://www.gixxer.com/forums/images/graemlins/thumb.gif Hell even tell her that Jeffw sent you that way.

3232 Snelling Ave. S.
Minneapolis, MN 55406
612/721-8868

http://www.roysrepair.com/images_in_use/2in1map.jpg

ok cool, thanks for the info, will do

I have a selection of custom maps that I've built on the dyno in albuquerque. about 5000 ft. I have to sort through them to find out exactly what the mods were on the bikes, but GSXR 600's have been plentifull with different pipe / air filter / cam combinations! Also made one for a 750 racer. I'll look into the maps on saturday to see what we got. performancedyno@mcleodusa.net -Lincoln

Woot cool, thanks a ton, will be looking forward to seeing if you have any onhand that will work with mine

nice map jeff dont think it will work LOL

sorry couldnt help my self

CMBTDOC, I use to have the exact same setup. I used the user submitted map from dynojet.com. It worked great with my bike. I also have an 03 GSXR600.

I dug up some maps that ive built in albuquerque. GSXR 600's one 98 GSXR 750, Busa's , GSXR 1000's, even an SV 1000!! performancedyno@mcleodusa.net

BLUKAX99... Just finished my map on saturday and WOW>.... i gained 5 or 6 hp..... and its smooth pulls like a beast. Well it feels like it. 600 03 muzzy full......do you remember that dead spot that i was talking about it seems like its there now when i do a roll on it feels like im getting to little gas at about 7000 .... its proably my elevation difference from albq to gallup .... still like it .... should be a beast on the track days.

Glad you like it!! just go into the map now and adjust any problem areas and you may be able to dial it in yourself! call me if you need help. 505-410-5465 or email me. Next track day is march 7 in Alb.. i'll have the dyno there! -Lincoln

can anyone help me out with a map for my 03 750. it has a tre, full hindle highmount, bmc filter....all help is appreciated.

I been everywhere looking for a map for my bike.. I've got a 00 gaxr 750 with a high mount MIG slip on, K & N filter..
Does anyone have any maps i can use.. Looking for anything close to this set up.. I can have someone tweak it for me..

Thanks

I have a 03'Gixxer 1K with the following engine mods :

TRE / Full Yosh RS3 Race System / Web Cams/Gears / PC3R USB.

The bike dynoed at 164.5 rwhp. In first gear there is a lag, flat spot up till about 5000 rpm, after that the bike pulls like a freight train. All other gears and rpms are solid. I am currently running a basic map for the exhaust only off the Dyno Jet site. Does anyone else have any suggestions or maps that may work better for me. Don't get me wrong, I'm happy with the results of my bike, I just want to get the most out of it that I can.

sk8losi said:
needing a map for 06 600 m4 bolt on / k&n



does anyone have this map?

i am looking for a map for an 02 600 with full m4 system and K&N

ALSTARE, do you remember which user submitted map that you used??

looking for map 2000 gsxr750 1k header yosh tri oval half system k&n tre pair mod pc2 removed secondary throttle vale and acuator and rod thanks.

Howz about a map for '03 1K with Yosh RS3 b/o,bmc filter?
Been lookin' thru the Yoshimura site and they do have maps for some of their bolt-ons but it was for the a 2001 model.If they had it for an '03 I wonder if i could just copy the values (EMS box) and put it on the PCIII and save it,it should work right????

i got a tre chip, k&n filter, pc3 usb, k&n filter, yoshimura trs tri oval slip on..i need a map for this help.......2002gsxr600

Guy's just use the closest map that Dynojet (http://www.powercommander.com/suppsuzmaps.shtml) provides. That should provide you with a good base to work from. You can then use the software to do subtle adjustments in the RPM ranges where you need more or less fuel.

help! need a map for a 01 gsxr 600
my set up
-02 gsxr 750 headers/pipes with a yoshi rs3 slip on.
-k and n power commander
the set up i use to have was full titanium 1000cc headers and a D n D mid pipe . the owner who use to own the bike befor me used it as a semi track bike and street, but more on the tracks. If any one can help me out i truly appreciate it, i'n new to the street bike scene and need help.

Howz about a map for '03 1K with Yosh RS3 b/o,bmc filter?
Been lookin' thru the Yoshimura site and they do have maps for some of their bolt-ons but it was for the a 2001 model.If they had it for an '03 I wonder if i could just copy the values (EMS box) and put it on the PCIII and save it,it should work right????
whats up dawg, i was wondering if you ever found out the map for your bike, i have same setup as yours and looking for one, if you have could u help me out bro, thanks bunch,
flex

Howz about a map for '03 1K with Yosh RS3 b/o,bmc filter?
Been lookin' thru the Yoshimura site and they do have maps for some of their bolt-ons but it was for the a 2001 model.If they had it for an '03 I wonder if i could just copy the values (EMS box) and put it on the PCIII and save it,it should work right????
hey rookie, i have exact same setup as you, i was wondering if you ever found the map for your bike, if you have, could you help me out with the map, my email is ifbb_ironman@yahoo.net
thanks

I got an '01 GSXR600 with a Yosh RS-3 Bolt-on and stock air filter. I am using one of the maps off the dynojet site for a Wileyco Bolt-on. Is that as good as I am gonna get w/o going w/a custom map? Or does someone have one done for my setup?

looking for a high altitude map 3500 ft or so ....

02gsxr600 tre mod, k&n yosh rs3 pc3 usb