What will I have to do to change a bent left clip on?

I have the manual but it isnt clear.

Thanks in advance guys,

Ben

What model is it from? The 600/750 or the 1100? The 1100 is a little different than the others.

http://www.gixxer.com/forums/images/graemlins/cheers.gif

750

You'll have to take your top trple off so the big nut that your hose goes through and underneath the triple there are 2 bolts (10mm) that hold your clip-ons to the triple one on
each clip-on then you have two more bolts clamping the clip-ons to the fork tubes
they are 14mm I usually take these 2 all the way out andthen spread the triple where it's connected to the fork tubes with a screw driver one on each side. Working from under the
big nut where you hose went through pry upwards being careful not to scratch things up.

Thanks for the tips http://www.gixxer.com/forums/images/graemlins/thumb.gif

your'e welcome been there done that (at least 3X) http://www.gixxer.com/forums/images/graemlins/bash.gif