http://stores.sportbiketrackgear.com/images/InitialSet/hotbodiesstgheader.jpg (http://stores.sportbiketrackgear.com/Categories.bok?category=HOTBODIES+RACING+On+Sale+a t+Sportbiketrackgear.com)
http://stores.sportbiketrackgear.com/images/InitialSet/hotbodiesracebodyworkhome.jpg (http://stores.sportbiketrackgear.com/Categories.bok?category=HOTBODIES+RACING+On+Sale+a t+Sportbiketrackgear.com)http://stores.sportbiketrackgear.com/images/InitialSet/hotbodieswindscreenshome.jpg (http://stores.sportbiketrackgear.com/Categories.bok?category=HOTBODIES+RACING+On+Sale+a t+Sportbiketrackgear.com)

We are including a FREE Clear Windscreen with every set of bodywork
purchased. The screen will be a Stock Radius Clear Screen. If the Stock
Radius Screen is out of stock we will send a Dual Radius Screen. The
Hotbodies Screens are available for most current bikes. This promotion
is not available for bikes which Hotbodies does not offer a screen for.


Shipping is FREE, price shown on our site is DELIVERED!
100% Customer Satisfaction Guarantee backed by Hotbodies Racing.
Contingency paid in EVERY race organization in the USA.
Four-harness fiberglass weave for extra durability.
Reinforced leading edges and mounting seams.
Finished in an automotive grade urethane primer; white on the outside, black on the inside.
AMA Spec oil containment belly pan.
All pieces are available individually if needed. Please call to order individual pieces at 888-784-4327
Ultra Flexible for easy installation.


No other Bodywork Manufacturer supports the sport like Hotbodies does.
This is a good product at a price we can all afford. I have used this myself
on three different bikes with excellent results each time.

Don't forget to have a look at our KR Tuned Exhaust Promotion. We are
offering one of the BEST Pipes on the market at pricing many dealers can
not even purchase it for. This exhaust offer is lilited to inventory on hand.

Thanks for all your support,
Brian Van

Is this still going on?? I couldn't find it on your website...unless it's not for an 06 GSXR-600??

Yes this is still running. Give us a call 888-784-4327

old thread but, I just started noticing cracking in my hot bodies kit. Right side fairing cracking near the top at the front where it curves hard and also my smoked hotbodies windscreen. The bike has never touched a single thing, its merely from going fast. I know this because the wimp who owned my bike never went over 90. Then I get it and within a few weeks cracks start forming on the windscreen. Then just last week the body cracked during some high speed runs. The windscreen im not too bothered about, it clearly broke because it doesnt have a thicker line of plastic around the top like stock ones do to give rigidity. I cant imagine it being built to put up with 180mph winds being just a single ply of plastic with no arch support.

But the body piece makes me worry. Do I leave it until it blows apart at 180mph, do I replace it and hope it doesnt fail again? Do I have to buy a stronger/better body kit, or was it just a fluke with mine. Were these even meant for 180+mph or are they just for show? Do I need a race body just to go the stock speed limit? It did crack right where the front experiences the most force from wind, about 4 inches down from the top of the right side panel where it arches sharply down. I would be interested to see what the seller of these recommends.

^^ :lmao

old thread but, I just started noticing cracking in my hot bodies kit. Right side fairing cracking near the top at the front where it curves hard and also my smoked hotbodies windscreen. The bike has never touched a single thing, its merely from going fast. I know this because the wimp who owned my bike never went over 90. Then I get it and within a few weeks cracks start forming on the windscreen. Then just last week the body cracked during some high speed runs. The windscreen im not too bothered about, it clearly broke because it doesnt have a thicker line of plastic around the top like stock ones do to give rigidity. I cant imagine it being built to put up with 180mph winds being just a single ply of plastic with no arch support.

But the body piece makes me worry. Do I leave it until it blows apart at 180mph, do I replace it and hope it doesnt fail again? Do I have to buy a stronger/better body kit, or was it just a fluke with mine. Were these even meant for 180+mph or are they just for show? Do I need a race body just to go the stock speed limit? It did crack right where the front experiences the most force from wind, about 4 inches down from the top of the right side panel where it arches sharply down. I would be interested to see what the seller of these recommends.

1. Hotbodies products is totally garbage, I'm shock that a reputable company like sportbiketrackgear sells there products, I for one had to go to hotbodies shop to show those morons that there products are garbage on two occassions, Your best bet is to get sharkskins or body armour they make very good quality body kits.
2. I hope that your not going 180mph on the street, instead your going 180mph on the track be safe good luck.