http://i286.photobucket.com/albums/ll91/lowndspecialist/GSXR600750K8tailtidy.jpg
installed this on my Black K8, very well made and looks great. Just waiting for my plates to arrive and know I need to find a carbon fiber license plate holder to keep everything as dark as possible. Nice LED light illuminates plate but is very unobtrusive looking and blends in well.

how hard was it to install? i don't have a garage.... :dunno what tools did you need? was it hard to get the factory stuff off?

i orderd somthing simular to that, do u have really small lights to luminate your numberplate still? i orderd one for like 70 euro that basicly the same as that with number plate light, i cant wait for it to arrive. the bike will be so pimp then

how hard was it to install? i don't have a garage.... :dunno what tools did you need? was it hard to get the factory stuff off?

I just fitted an r&g tail tidy, very easy to do if you take your time, pop 5 rivets off, 3 on top 2 underneath, take the old tail piece off, disconnect it first, fit the new one, wire it up first, check it works, and thats it.
Very simple.
:punk
ps I dont have a garage either !!

under 10 minutes to install. The LED plate light is bright enough for the cops and is attached out of the way and neat up on top. Pop off old, tighten 4 allen bolts and splice the plate wires from the old fender to the new tail tidy. Make sure you get positive and negative before you seal the wires. If you do not see any light when your bike is on swap the wires.

What site did you order it from? for some reason I can't get the site to work...

Why pay for a tail tidy etc... when you can do this with the OEM brackets:

http://i131.photobucket.com/albums/p294/logicworkz/Da%20Gixxer/IMG_6229.jpg

http://i131.photobucket.com/albums/p294/logicworkz/Da%20Gixxer/IMG_6249.jpg

that looks good gzer, big improvment over the stock unit, did you find it hard to do ?
I think thats what im gonna do with mine as well

Why pay for a tail tidy etc... when you can do this with the OEM brackets:

http://i131.photobucket.com/albums/p294/logicworkz/Da%20Gixxer/IMG_6229.jpg

http://i131.photobucket.com/albums/p294/logicworkz/Da%20Gixxer/IMG_6249.jpg


hmmmm why? because you have a $11,000 bike and why have some homemade looking eliminator on your bike when for $60, you can have something that compliments your bike and looks factory. That is why. I applaud your money saving efforts, but a professionally fabrictaed piece looks much better than a bent dremeled hacked eliminator.

hmmmm why? because you have a $11,000 bike and why have some homemade looking eliminator on your bike when for $60, you can have something that compliments your bike and looks factory. That is why. I applaud your money saving efforts, but a professionally fabrictaed piece looks much better than a bent dremeled hacked eliminator.

:cheers

Well, to each his own. And for the record, no dremel was used. I just bent the oem bracket and attached the license plate bracket. IMO it doesn't look at all like some hacked up unit. In fact, it's very neat and since my undertail is black, it blends right in. Incognito, details here: Click (http://www.gixxer.com/forums/showthread.php?t=181327)

hmmmm why? because you have a $11,000 bike and why have some homemade looking eliminator on your bike when for $60, you can have something that compliments your bike and looks factory. That is why. I applaud your money saving efforts, but a professionally fabrictaed piece looks much better than a bent dremeled hacked eliminator.

100% agreed bro. Plus I have kept all my stock parts in a box (rear fender, rear seat, exhaust etc) so when I come to sell it, I can put it back to stock IF need be.

i like your evoteck.. my friend just got one from r&g and it looks great so i got myself one

Can you/has anybody mounted the evotech deep in by the passenger pegs? Any pics?