|
GottaSV 09-07-2003, 07:17 PM I would like to add 2 or 3 teeth to my rear and go with the 520 chain. So what I need to know is how many teeth are on my stock sprockets. And if anyone knows of any conversion kits that I could order let me know. Thanks G-FORCE 09-07-2003, 08:55 PM your 600 has 45 teeth stock...that help? chrisk 09-08-2003, 04:08 PM I just ordered some new sprockets (Sprocket Specialists 16/48) and a DID ERV2 520 chain from kneedraggers, supposed to get here tomorrow http://www.gixxer.com/forums/images/graemlins/grin.gif. I'll let you know how they work out... Stock for a 600 is: Front - 16 Rear - 45 Vespa_Killer 09-09-2003, 12:11 AM If you check out Sprocket center (http://www.sprocketcenter.com/home.asp) they've got goodd deals and a good selection. just tell them what size sprockets you want when you order the kit http://www.gixxer.com/forums/images/graemlins/burnout.gif gimpsta 09-09-2003, 01:17 AM yeah just a little fyi a -1 front = a +3 rear. And I hope you have to knowledge a proper tools to add a new chain and sprockets, cause a little mistake involving this can really kill you. But adding +2 will add a little torque but not a whole lot. matters what u're looking for. STRECH 04-08-2008, 02:43 PM I just put a 15 in the front and 47 in the rear and it screams. I lost some top end but it has no problem with power whellies and probably still goes 130+ and gets there fast. bpez 04-08-2008, 03:01 PM Motomummy has a chart on his home page http://www.motomummy.com/store/pages.php?pageid=1 | ||