Hey guys, I am done trackdays this summer and when I put back on the stock bodywork everything works except the low beam/running headlights. The High beam (brights) lights work just fine. Anybody know what's the deal? is it a blown fuse or do I need to replace the light?

Chris,
GSXR 750 K2

Arent the lights standard H4? That means that there are 2 filiments inside. You can concievably break/burnout the low-beam and only the high-beam would work. LOOK at them make sure both look good.

I dont know much more about wiring or fuses in this respect. Wait for another response.
Good luck man.

Change the bulb......simple as that. http://www.gixxer.com/forums/images/graemlins/burnout.gif

same thing happen to me, on one side, and i don't know why. They got less then 2k miles on them

Thanks guys for the info.

Let me know if changing the bulbs work. I have the same problem but mine are H7's.

there are separate fuses for low beam and high beam. check the low beam fuse.

it seems like it may be a little more involved than just changing the bulbs.....so both the low beam filaments would have went out at the exact same time??? http://www.gixxer.com/forums/images/graemlins/wait.gifhmmm.... http://www.gixxer.com/forums/images/graemlins/wait.gif just my .02

Alright here is the deal with my headlights, They are H7's and it was a blown fuse. I have no idea how that happened. All I did was remove the entire upper and put in storage. The low beams were working before I removed the upper, and when I plug them back in not working? The only thing I can think of is some mostire built up on the connectors on either the bulds or the sockets and when I plug them in and turn it on it blew? The sockets were exposed all summer long and I do remember times towing the bike back from the tracking the rain.

2002 (k2) models are supposed to have h4 headlights.

I got H7's in mine, and my manual also say's H7 for the headlight bulbs. Oh well I got my lights working again