would you mind posting up a picture. Trying to gather a bunch of pictures of different color combinations. Thanks guys.

I actually just got mine put on thursday, i will try and get a couple pics posted up saturday..

its cold outside and a little dirty which explains the bad angles. but here blue banjos black lines

Heres clear lines with blue banjo's
http://i239.photobucket.com/albums/ff158/gixxerk8/PC290014.jpg

Not the best pics, but here are a few.

Smoke jacket with Ti fittings on my K6 1000.
http://img140.imageshack.us/img140/622/p1000603pv0.jpg
http://img214.imageshack.us/img214/9236/p1000604pq9.jpg
http://img112.imageshack.us/img112/6173/p1000605bu1.jpg

Cory,

Here are some pics of my blue lines with Gold Caliper and Blue M/C end's.
http://i47.photobucket.com/albums/f154/GSXR750XK5/DVC00163.jpg
Rear M/C


http://i47.photobucket.com/albums/f154/GSXR750XK5/DVC00165.jpg
Rear Caliper


http://i47.photobucket.com/albums/f154/GSXR750XK5/DVC00161.jpg
Front M/C


http://i47.photobucket.com/albums/f154/GSXR750XK5/DVC00158.jpg
Right Front Caliper w/ crossover


http://i47.photobucket.com/albums/f154/GSXR750XK5/DVC00160.jpg
Left Front Caliper

gsx-r with r6 calipers.
http://img.photobucket.com/albums/v450/snipers002/motorcycle%20pics/Dsc00132.jpg
http://img.photobucket.com/albums/v450/snipers002/motorcycle%20pics/Dsc00124.jpg

curious which performs better the spiegler or the galfer lines????????

they perform the same as all aftermarket brake lines don't flex when pressure is applied from the fluid. It comes down to price, fitment and looks. IMO spieglers color options and the quality/looks of their colors are top notch and along with their customer service...

With other brands you don't have the color options, colors for the banjo bolts, and the colors they do have aren't as good as Spieglers imo. It's nice that all of spieglers employees and the owner all race. The spiegler quick disconnects that we have on our shop bike were brought into the country by the spiegler owner as he wanted them on his endurance race bike :) The guys at Spiegler really know their stuff...

keep the pics coming...these are awesome and will help others when they go pick out some colored Spieglers.

I'm thinking of ordering blue lines with red banjos....or blue/blue.

I'll definitely upload some pics after I make up my mind.

Question, why does the K6 1000 kit above have a cross-over? it's not dual lines from the master?

Here's my contribution Red lines w/ red banjo's.
http://img.photobucket.com/albums/v330/SoSoAE86/My%20street%20bizzle/DSCF2175.jpg
http://img.photobucket.com/albums/v330/SoSoAE86/My%20street%20bizzle/DSCF2185.jpg
http://img.photobucket.com/albums/v330/SoSoAE86/My%20street%20bizzle/DSCF2183.jpg
http://img.photobucket.com/albums/v330/SoSoAE86/My%20street%20bizzle/DSCF2036.jpg

keep them coming guys. These will all be on our website if you guys don't mind...keep them rolling in.

Drop us a link when there on your site.

http://img.photobucket.com/albums/v600/machman/045.jpg


http://img.photobucket.com/albums/v600/machman/043.jpg


http://img.photobucket.com/albums/v600/machman/030.jpg

http://img.photobucket.com/albums/v600/machman/037.jpg

gsxrstephen NOW THAT IS WHAT WE ARE LOOKING FOR. Thank you for those first few pictures.

Corey, are your PMs getting through as i have sent you a few in the last week?

whats with all the crossover setups? twin lines off the master is the way to go guys. :punk

yes we are replying to pm's. Sab we only sell 2 off the master setups so if anyone get them from us and installed them with crossover setups then they were installed incorrectly. Spiegler sells oem type setups and 2 off the master setups. We only sell the 2 off the master cyl setups and our kits come with matching colored banjo bolts :) Best kits on the market...

Here is my Front Kit for the Speigler lines. Custom Lines. I also have the rear kit custom and the hydraulic clutch kit custom for my K6 with the Discacciati conversion kit. All Black on Black banjos.

This is a Superbike Style routing on the front. It is a 950 Type Tee fitting order.







http://home.cogeco.ca/~szekeres1/line1.jpg
http://home.cogeco.ca/~szekeres1/line2.jpg
http://home.cogeco.ca/~szekeres1/line3.jpg
http://home.cogeco.ca/~szekeres1/line4.jpg
http://home.cogeco.ca/~szekeres1/line5.jpg

Whoa, 190mph! I think you need an update thread in the 1K section. Killer parts.

yes we are replying to pm's. Sab we only sell 2 off the master setups so if anyone get them from us and installed them with crossover setups then they were installed incorrectly. Spiegler sells oem type setups and 2 off the master setups. We only sell the 2 off the master cyl setups and our kits come with matching colored banjo bolts :) Best kits on the market...

why is 2 off the master better?

more direct route to each caliper then going from the master cyl, to one caliper, then to the other. Or the pics above would get the jobe done well also. Do a Y or T connector and branch off to each caliper. Spieglers best attributes though are the finish they come in. I have seen galfer's fade very easy, crack banjo's when torquing them down, and other issues. The finish on spiegler is what is amazing. For instance if you see a galfer gold banjo compared to spieglers gold the difference is mind boggling. All brake lines won't flex so they perform the same. The finish and anti twist technology is what gives Spiegler an upper hand.

I see you got the RCS's on your bike. How do you like them so far?





Here is my Front Kit for the Speigler lines. Custom Lines. I also have the rear kit custom and the hydraulic clutch kit custom for my K6 with the Discacciati conversion kit. All Black on Black banjos.

This is a Superbike Style routing on the front. It is a 950 Type Tee fitting order.









http://home.cogeco.ca/~szekeres1/line3.jpg
http://home.cogeco.ca/~szekeres1/line4.jpg

Blue Lines with Red Banjos

http://a704.ac-images.myspacecdn.com/images01/59/l_f3dd9e1706061778db081091365a5697.jpg

nice pic :) what exhaust is that though?

looks like str8 pipe
bad ass!

http://i23.photobucket.com/albums/b367/ovr200/DSC00283.jpg
http://i23.photobucket.com/albums/b367/ovr200/DSC00281.jpg

Love the quick disconnects...have them on our shop bike as well :)

Blue Lines with Red Banjos

http://a704.ac-images.myspacecdn.com/images01/59/l_f3dd9e1706061778db081091365a5697.jpg


IF POSIN' IS WRONG, I DON'T WANNA BE RIGHT !! :punk

Quick question. Maybe a stupid question. If I order the spiegler kit does it come with 2 front lines and one rear? The quantity on the site says 1 so I got confused. Thanks.

Never mind. I "read" the description and it does say it's a full kit, 2 front and 1 rear. Haha maybe I should read closer. Sorry.

yup, a full kit with front lines, and rear line, and all banjo bolts to match the color of the banjo's :)

Thanks hehe. What brake fluid would you recommend when installing the kit?

Anybody have pictures of the white lines yet? I'm curious to see how they look on the bike.

we have only had 2 people get them and they do look very damn good. I believe they got white lines with black banjo's and I was shocked at how well they turned out. Our next shop bike will mostly likely have white lines with either titanium or black banjo's.

ordered black with red banjos, akra shorty, and pcIII. will post pictures once I get them.

ps. that posin pic is BADA$$ to the MAx yo.

smoke lines with red bangos

badass...which more would post pics like that hten we can do a nice website with all the different colors showing. Thank you

So I just installed new Spiegler brake lines for the front with two lines coming off the master (not the crossover arrangement I've seen in some photos here). Bleeding is complete.

Note that one line is 1+ inch longer than the other: this one I routed to the left side of the bike.

The third line marked rear hasn't been installed...no I didn't f--k up and try to install the rear line on the front.

So my question/observation is that both front lines seem a bit long and it concerns me they might bind up when the front suspension is fully compressed.

I'm about to install the bracket that mounts to the triple clamp to secure the lines "up top", use the loop on the back of the fender to tie off the left side line and go the track this weekend.

Any comments and/or observations would be appreciated.

race bikes often have them VERY long. they won't bind up though. The only thing to watch for is to make sure that when you turn the bike they don't snag on anything like the damper. make sure you can turn from full left to full right w/o worrying about them snagging anything.

Just thought I'd post a testiment for Spiegler's.

I had a fairly minor lowside at Putnam over the weekend, and the clip on pushed the brake line ends into the forks, loosened up the banjo, and I expected to need new brake lines.

I ended up re-torquing them and they worked fine. Was really surprised they handled the impact.

Here are my Smoke lines w/ red banjo bolts and fittings.... originally i was gonna go w/ the black lines...but im very happy i went w these smoke lines

awesome pictures. That's what we are looking for. Do you mind if we use them on our website?

:thumbupawesome pictures. That's what we are looking for. Do you mind if we use them on our website?



nope go right ahead
:cheers

I'm a little late on this thread but i hope to have pics of my new lines installed soon :)

http://img.photobucket.com/albums/v466/Mashimaro9/IMG_0747.jpg

http://img.photobucket.com/albums/v466/Mashimaro9/IMG_0750.jpg

post them up when you get them installed :)

Here are my Spiegler Lines.
I bought a Bazzaz Z-AFM, Yoshi Case Savers, the brake lines, Frame Sliders and Tank Grips over winter break. I finally got the exhaust welded with the wide band sensor bung. I couldn't be happier!
Thanks Corey!

http://farm5.static.flickr.com/4020/4530675508_9679e5bb6d_b.jpghttp://farm5.static.flickr.com/4005/4530676728_859a4ef0ba_b.jpghttp://farm5.static.flickr.com/4025/4530044707_934d4f865f_b.jpghttp://farm5.static.flickr.com/4022/4530678928_86e462ea99_b.jpg

I have a 2006 GSX-R 1000 how are the front lines ran with the 2 lines coming off the master cylinder? The stock one run over the fender, what hold the left side on if you don't use the bracket on the fender? Came across this tread today, because I am looking for some nice brake lines. I was looking at Galfer, but Spiegler look nicer. Where can I order these brake lines? Thanks for your help.

We are a vendor and sell Spiegler lol.

You just attach both to the master cyl and then run them down to each caliber. Most all aftermarket brake lines are like this. You don't need anything to hold them on. They won't move around.

We are a vendor and sell Spiegler lol.

You just attach both to the master cyl and then run them down to each caliber. Most all aftermarket brake lines are like this. You don't need anything to hold them on. They won't move around.


Thanks for information. Like your website. I think I will order some brake lines.:cheers

Here are my Smoke lines w/ red banjo bolts and fittings.... originally i was gonna go w/ the black lines...but im very happy i went w these smoke lines


Off Topic, but did you paint your rear set footpeg bracket or did you have them power coated black? Look good.

Hey MotoMummy, why did Suzuki run all there brake lines across the fender, to screw them up? My others bikes I used to own didnt do stuff like this. Love the bike though and need to start adding some accessories and your site the one to buy from. Thanks

Lots of bikes route it that way. IT's not uncommon at all. why they do it that way I can't answer as they would need to answer that one. It's not uncommon at all for sportbike oem to be routed with an over the fender line.

Lots of bikes route it that way. IT's not uncommon at all. why they do it that way I can't answer as they would need to answer that one. It's not uncommon at all for sportbike oem to be routed with an over the fender line.


I like your web site order my brake lines, will be ordering more stuff on there later. Going to get some carbon fiber.

MotoMummy, how long does it take to receive your brake lines after your order them? I know on your web site that is says there not made till you order them.

Ordered mine today! Will post pics once I get them on...

Here are mine. Transparent blue with black banjos.

Looks good :)

Hey MotoMummy, why did Suzuki run all there brake lines across the fender, to screw them up? My others bikes I used to own didnt do stuff like this. Love the bike though and need to start adding some accessories and your site the one to buy from. Thanks

They do it for shorter total hose length (more hose, more flex), and to only have one hose to contend with in the cockpit. Best design is a single line from the master to a T at the lower triple with equal length to the calipers, but I know I am in the minority with that opinion. :) The Spieglers are very nice looking though, and I really like that you can spin the banjos. I wish they all did that.

Here is my Front Kit for the Speigler lines. Custom Lines. I also have the rear kit custom and the hydraulic clutch kit custom for my K6 with the Discacciati conversion kit. All Black on Black banjos.

This is a Superbike Style routing on the front. It is a 950 Type Tee fitting order.







http://home.cogeco.ca/~szekeres1/line1.jpg
http://home.cogeco.ca/~szekeres1/line2.jpg
http://home.cogeco.ca/~szekeres1/line3.jpg
http://home.cogeco.ca/~szekeres1/line4.jpg
http://home.cogeco.ca/~szekeres1/line5.jpg

Pimp bike man.:cheers

Here is my Front Kit for the Speigler lines. Custom Lines. I also have the rear kit custom and the hydraulic clutch kit custom for my K6 with the Discacciati conversion kit. All Black on Black banjos.

This is a Superbike Style routing on the front. It is a 950 Type Tee fitting order.







http://home.cogeco.ca/~szekeres1/line1.jpg
http://home.cogeco.ca/~szekeres1/line2.jpg
http://home.cogeco.ca/~szekeres1/line3.jpg
http://home.cogeco.ca/~szekeres1/line4.jpg
http://home.cogeco.ca/~szekeres1/line5.jpg


Me Likey.

White lines with titanium banjos. Got them from motomummy. As always great service and speedy shipping, thanks Corey. Sorry bout the blurry picks, it was like 20 below 0 the day I took them:wacko

One more

awesome pics....

got a question, my bike already has blue lines with black banjos but i am re-doing the bikes colors. is there a way i could just change the line color? i want black. anyone know of any products that could go around the line or something to give it a different look?

You would need new lines to change the color. Sorry.

Here my Spiegler brake lines on a 2006 GSX-R 1000 with black coating and red anodize bango bolts.


http://i868.photobucket.com/albums/ab246/Paul-68/2006%20GSX-R%201000/BrakeLines.jpg
http://i868.photobucket.com/albums/ab246/Paul-68/2006%20GSX-R%201000/BrakeLines2.jpg
http://i868.photobucket.com/albums/ab246/Paul-68/2006%20GSX-R%201000/BrakeLines3.jpg
http://i868.photobucket.com/albums/ab246/Paul-68/2006%20GSX-R%201000/BrakeLines4.jpg
http://i868.photobucket.com/albums/ab246/Paul-68/2006%20GSX-R%201000/RearBrakeLines.jpg
http://i868.photobucket.com/albums/ab246/Paul-68/2006%20GSX-R%201000/RearBrakeLines2.jpg

how long is the usual turn around time for front and back brake lines. I ordered some last week but I know you dont have every color and make combination readily accessible. I'm not complaining just wondering when to expect them. Just anxious I guess. Thanks

Normally around a week sometimes 1.5 weeks.

Thanks