This is for a 600 but from what I understand will work on 750's also. The header and collectors are in great shape and ready to run (but not with zip ties as pictured). The midpipe is for a 1K, has a few dents, and one of them went all the way through. It fits the collectors fine, but I don't know how it will work on the bike cause I don't have one to try it on. I only have what's in the photos and nothing more. I'll include the zip ties after I cut them off if you want them.

I bought this to mock up on my oiler and decided it was just too much work so now I need the scratch for a new header. Make me an offer.

On ebay now. Reserve set at $150. So far I don't have any bids so if you make me an offer I can't refuse - then I likely won't.

offer $50

If the header is Titanium it requires TIG welding and a Ti rod.

offer $50

If the header is Titanium it requires TIG welding and a Ti rod.

That's an offer I can refuse.

The header is titanium and it is perfect, that is what you are paying for not the midpipe. I used the midpipe for mock up purposes only and I am including it only because I no longer need it. If you have a set of these with a dented tube, these would be your best bet for a fix since replacement tubes are not cheap - about $125 per tube. I think the collectors are around $240 and there are two of them.

Thanks for the tip on the TIG, I wouldn't have known that. I thought you could just stick it together with some pigeon shit and duck tape. :rolleyes

Midpipe is sold. All that is left are the headers. I'll take $175 shipped in the US. Nothing wrong with them at all - not a scratch, dent, or nick, but they have been mounted and used, just not by me.

Is that the crossover version?