Yes its right 650cc. U ask how. well 2mm over bore 1mm of stroke added. do the math.
its 69mm x 69mm x 43.5 x .7854 x 4 = 650.6 cc

A set of yoshimura Stage R cams, Carrillo Rods, wiseco 13.5:1 pistons, shaved head. over sized valves, Full Akrapovic Evo Exhaust with 6" cut of the muffler, Power commander 3R.
-1 up frnt +4 in the rear Oz racing rims with Pilot sports.

My one thing is i want to put dirtbike handle bars on my 600 forks. how do i do this.
I have a nice set of moto cross brake and clutch levers that will work. "two finger pull"
I also have a speed triple head light set to bolt on. a GSXR tail with under tail. Im also making a braket to hold on my Shark Skinz lower one piece fairing. no upper fairing.
My one thing where to start. since this bike is a recoverd stolen bike . and as it sits its a frame, motor, frnt end, with wiring, I can get the ECU, and the other parts to make it run but what else should i do to make it into the smallest bad ass STreet fighter.

I hoping with the 650cc motor it will make good number of HP and tourqe to be a wicked SF.
any ideas will be cool.

I know that other SF owners must have some kind of good ideas or they wouldnt have an SF. I'm new to this Streetfighter thing, I have some kind of idea of what i want how its going to look. but I dont know how to Put MX bars on my bike.

I've biult a GSXR1000 K1 Street fighter and used the standard top mount to mount the bars on.

I had the back of them milled and the holes drilled in them for some Renthal Fat bar mounts.

Wasn't that hard to do.

If you're desperate, let me know and I'll try to get some pics.

Also, if you are keen for a good clean look then I recomend you remove all of the origional undertray and move the CPU and battery so that there is nothing in the gap between the underside of the seat and the subframe supports. You can see all the rear suspension and it looks real clean(but suttle).

The Rad overflow bottle and Horn will fit under the tank out of sight too.

http://www.gixxer.com/forums/images/graemlins/thumb.gif

check these guys out for top yolk mods
www.streetfighterstore.com (http://www.streetfighterstore.com)

kool ill look into it. Any other web sites I should checkout. Also is there any good sites in the US that has good streetfighter parts.

Update on my project bike. A set of Pro Taper Bars, a wicked three light head light unit from parts unlimited. 2 (36 deg) flood lights 1 (10 deg) pencil beam. HYPERPRO steering Damper top mount. Ohlines rear shock on order along with racetech fork springs and valving. More updates coming soon.